Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > 200 Series General > 200 Series Articles
Register Members CarsBlogs Help Calendar Mark Forums Read

Notices

200 Series Articles How to's and Guides for the 200 series.

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

How to release the bonnet without the cable

Views : 6472

Replies : 0

Users Viewing This Thread :  

 
 
Thread Tools Display Modes
Old Mar 24th, 2011, 17:48   #1
Mike_Brace
Former contributor
 

Last Online: Sep 15th, 2018 01:25
Join Date: Dec 2004
Location: Rhosgoch, Anglesey
Default How to release the bonnet without the cable

A common problem on 240s is with bonnet release cables that either break or seize leaving the bonnet firmly closed and apparently unopenable. There are two ways of access.

The first is to try lifting the grille and provided there is clearance for the bottom lugs the grille can been pulled forwards at the bottom and then down to remove it giving access to the latch.

The way that does not risk damage to the grille is as follows. Underneath the car you will see a piece of plastic clipped above the spoiler:



Unclip this and pull it back to allow access for your arm:



You can then reach up inside with your arm to the catch:



You can either pull on the cable or press on the other side of the swivel (push towards LHS of car) Finger in the picture is in correct position for pushing lever to open.



If the cable is broken the cheap fix is to fix a length of electric cable to the catch (where the finger is) and push this out through the grille. This can then be pulled towards the LHS of the car (to your right as you face the car) to release the catch without needing to go back in from underneath.

Mike
Link to original thread

How to lubricate cable

Quote:
Originally Posted by minesa240x3 View Post
.

The inner cable has a tendency to get stuck but more pinched.It is a single piece wire innard that doesn't get to move much when being used..It's very tensile as well(stiff).
Mine tend to go a bit rusty just where the cable turns by the back of the headlight.I assume it's the tightest angle the cable has to turn.

With mine I undo the catch by the bonnet latch on the bulkhead and take the cable out of the mechanism.I then support the cable sticking upright and go find some bluetack or white post it stuff or plasticine.Make a ball of said stuff and then push a hole through it,Slide it onto the outer cable and squish it tight about level with the top of the outer cable.

Mould the top part to make a funnel shape.Then find some thin oil NOT wd40 and pour some in.
Now you need someone to pull the handle inside the car and you then pull the inner back out again.Keep working it back and forth and eventually it will become a lot easier.

Job Done.
Regards Brian.
__________________
A Volvo is for life not just for Christmas!



Last edited by classicswede; Feb 5th, 2012 at 10:52. Reason: further infomation added
Mike_Brace is offline  
The Following 13 Users Say Thank You to Mike_Brace For This Useful Post:
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 21:06.


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.