|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
C70 Front Wishbone Ball Joint SizeViews : 321 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 12th, 2018, 19:14 | #1 |
It's just a name!
Last Online: Mar 31st, 2024 23:12
Join Date: Oct 2010
Location: Coningsby, Lincolnshire
|
C70 Front Wishbone Ball Joint Size
I am looking to replace the front wishbones on my 2010 2.0D C70.
I have some heavy juddering under braking and the front end generally feels a bit ‘scatty’. I am pretty confident it’s the wishbone bushes, but rather than just change the bushes I thought I would do the whole wishbone and then refurb the old ones on the bench with poly bushes when I get the time (plan would be to poly bush the whole car, but that iscost prohibitive right now). There seems to be two ball joint sizes, 18mm and 21mm, I can find plenty of info relating to S40/V50 chassis numbers and the relevant sizes, but nothing about the C70. I have an inkling that the C70 is only 21mm but I could be wrong, is somebody able to confirm for me please? I did put my reg in a couple of motorfactor sites but have had conflicting results. Cheers in advance
__________________
Current: 2015 S80 SE Lux D4 Previous: 2010 C70 2.0 SE Lux, 2004 V40 2.0 Sport Classic Founder member of the X40 In Dash Cup Holder Owners Club 😋 |
Nov 12th, 2018, 23:18 | #2 |
Senior Member
Last Online: Mar 31st, 2024 22:17
Join Date: Feb 2011
Location: Neath
|
My 2008 C70 D5 is 21mm. Couldn't get a ball joint splitter that was big enough anywhere locally, so ended up getting off ebay.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|