|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Car does not start, helpViews : 498 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 9th, 2015, 13:20 | #1 |
New Member
Last Online: Apr 14th, 2015 09:28
Join Date: Jan 2015
Location: Pietermaritzburg
|
Car does not start, help
Hi all
Please help. My car (2006 s60 2.0T) won't start. error code ECM-614B camshaft control exhaust faulty. erased it came back but now it is not coming back. Will this fault cause the car not to start or it should start and not idle well. What could cause this fault except if the solenoid is really faulty. battery is fine. Thanks Simon |
Feb 1st, 2015, 13:57 | #2 |
New Member
Last Online: Apr 14th, 2015 09:28
Join Date: Jan 2015
Location: Pietermaritzburg
|
Hi all
I've just found out the problem is that there is no current going to the crank sensor. I followed the wire all the way to the ecu then I checked what voltage I get close to the ECU about 5 cm. I got zero. I have not checked what I get if I make contact directly at the connector as it is a bit hard to reach there. But if I get zero does that mean the ECU is faulty or anything else to check? All other stuff works. Injectors and fuel pump are, there is spark. I can't think the ECU would die on one thing but I would appreciate your suggestions. To eliminate faulty multi-meter I checked the voltage on the camshaft sensor and got about 5. Any pointers please? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|