|
Information |
|
1800s air vent grill clips.Views : 2705 Replies : 16Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 18th, 2016, 15:51 | #11 |
Master Member
Last Online: Mar 7th, 2024 18:17
Join Date: May 2010
Location: wetherby
|
I-Roll have them BUT they are very very dear and with the postage insane. I would like three but at nearly £10 each and then the insane postage charge for things that are not stainless I think is OTT.
If anyone is making them then count me in for a set as long as they are not insane prices
__________________
Clive "Lets turn up the juice and see what shakes loose" |
Dec 20th, 2016, 06:54 | #12 | |
VOC Member
Last Online: Dec 14th, 2023 12:57
Join Date: Nov 2004
Location: fareham
|
Quote:
There are two types, one to hold the mesh to the grill and the other to hold the grill to the car. The ones that IRoll (and SKANDIX) have are the ones that hold the grill to the car. It appears the mesh ones are the same as the ones that hold the dash covering on. Have both numbers somewhere. I have ordered several different types from Brescoe to see if something will fit Will get back with answers Russ |
|
The Following User Says Thank You to tdz840 For This Useful Post: |
Dec 20th, 2016, 11:53 | #13 |
VOC Member
Last Online: Yesterday 14:34
Join Date: Jul 2006
Location: Chatham
|
I believe that Bresco would consider making these, subject to a minimum order due to tooling. They would obviously need a perfect sample of an original.
I have pictures of the 665287 clip which I can post if it is of interest. |
The Following 2 Users Say Thank You to Derek UK For This Useful Post: |
Dec 20th, 2016, 22:38 | #14 | |
VOC Member
Last Online: Dec 14th, 2023 12:57
Join Date: Nov 2004
Location: fareham
|
Quote:
Thanks, i have a couple of pics but none suitable to take accurate dimensions. What i suspect Bresco would ask for is an actual clip. Perhaps thats it, i buy a Skandix one and send it to Bresco? This is the Skandix part (http://www.skandix.de/en/spare-parts...inlet/1050793/), you can see why at €100+shipping (8) made me do a double take! Even one will probably be nearly 20 euros with shipping! Unless someone has one they are willing to share? Russ Ps placing a lot of hope that Bresco will be cheaper! |
|
Dec 21st, 2016, 12:56 | #15 |
VOC Member
Last Online: Yesterday 14:34
Join Date: Jul 2006
Location: Chatham
|
Pic posted anyway. There is a very small possibility that Bresco makes these clips but by contract aren't allowed to sell them themselves. Sure, there are other manufacturers around but it's a bit of a niche business with the tools needed being a bit specialised. http://www.bresco.com/
What does clip 192366 look like? |
The Following 2 Users Say Thank You to Derek UK For This Useful Post: |
Dec 21st, 2016, 13:17 | #16 |
VOC Member
Last Online: Dec 14th, 2023 12:57
Join Date: Nov 2004
Location: fareham
|
Thanks Derek
Will give Bresco a go;as you say they may have something suitable without resorting to buying a one off from SKANDIX Russ |
Dec 21st, 2016, 13:38 | #17 |
VOC Member
Last Online: Dec 14th, 2023 12:57
Join Date: Nov 2004
Location: fareham
|
Here is a pic of the retaining clip used to hold the mesh to the grill. Part number 192366-9 Item 106 on page 380-381 of the parts catalogue
Same clip is used to retain the cover for the dash I have plenty of these clips, which are in fact also obtainable from Bresco. It's the other clip, item 105 Anchorage 665287-9 that I need. I've emailed Bresco Russ Last edited by tdz840; Dec 21st, 2016 at 13:43. |
The Following 2 Users Say Thank You to tdz840 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|