|
Information |
|
pv444 bits neededViews : 1484 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 17th, 2011, 18:47 | #1 |
New Member
Last Online: Jan 14th, 2012 19:42
Join Date: Oct 2011
Location: Droitwich
|
pv444 bits needed
My car is missing whatever holds the bootlid open,also the door sill rubber trims.
Can anybody help please? |
Oct 17th, 2011, 21:54 | #2 |
.
Last Online: Jul 14th, 2013 14:28
Join Date: Dec 2009
Location: MK
|
The bootlid is held open by a pawl on the LH hinge.
|
The Following User Says Thank You to 940_Turbo For This Useful Post: |
Oct 19th, 2011, 19:23 | #3 |
New Member
Last Online: Jan 14th, 2012 19:42
Join Date: Oct 2011
Location: Droitwich
|
thanks for the info,have had a look and should be easy enough to make one of those.
cheers,andy. |
Oct 19th, 2011, 19:52 | #4 |
.
Last Online: Jul 14th, 2013 14:28
Join Date: Dec 2009
Location: MK
|
|
Oct 25th, 2011, 17:47 | #5 |
New Member
Last Online: Jan 14th, 2012 19:42
Join Date: Oct 2011
Location: Droitwich
|
Boot hinge
Hi,the hinges on my car are fine,and I can see where the pawl goes,at least I assume it fixes to the hinge bracket via the single hole in it.
It is just the pawl assembly I need.If you have one,that would be great. Cheers,Andy. |
Oct 25th, 2011, 22:41 | #6 |
.
Last Online: Jul 14th, 2013 14:28
Join Date: Dec 2009
Location: MK
|
The pawl is riveted between the two halves of the hinge. I don't think I can work up the enthusiasm to take a functional hinge apart to provide the part to complete another hinge......
It's available new http://www.cvi-automotive.se/en/arti...-lh-rear-hinge Last edited by 940_Turbo; Oct 25th, 2011 at 22:45. |
The Following User Says Thank You to 940_Turbo For This Useful Post: |
Oct 26th, 2011, 16:42 | #7 |
New Member
Last Online: Jan 14th, 2012 19:42
Join Date: Oct 2011
Location: Droitwich
|
hinge
Brilliant,I'll send for a new one.
Thanks a lot,Andy. |
Oct 27th, 2011, 14:41 | #8 |
Member
Last Online: Jan 27th, 2020 20:48
Join Date: Oct 2010
Location: Brum
|
hi, you are in droitwich?
im only in catshill (bromsgrove) and have a 444 im currently putting B230ft in and removing lots of bits you might like! |
Oct 28th, 2011, 19:20 | #9 |
New Member
Last Online: Jan 14th, 2012 19:42
Join Date: Oct 2011
Location: Droitwich
|
444 bits
Hi,if you can give me a ring on 01905 779398,perhaps I could come over,even if only to see what some parts look like and how they fit.
Cheers,Andy. |
Oct 31st, 2011, 22:31 | #10 |
I've Been Banned
Last Online: Nov 10th, 2013 22:01
Join Date: Dec 2005
Location: OLDHAM Lancs
|
ajmarshall, If i where you I would leave the "star" off the lid, and make yourself a chrome stay with walking stick rubbers on both ends.The reason I say this is simple there is only ONE star on the boot,and if some hamfisted person pulls it down without lifting it up first then you have "big" trouble. " IT WILL TWIST OUT OF SHAPE, BELIEVE ME I'VE SEEN IT DONE".Plus the fact that it only opens about 3ft 6ins you have to get on your knees to put things in.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|