S60 2.0T Exhaust, Rear box replacement

cantdecide · Oct 20th, 2018, 10:20

Hi
I have noticed today that the rear box on my 2002 S60 2.0T is blowing and on investigation it appears to be blowing at the weld (where the box meets the pipe)
Without lifting the car fully, it looks as though the rear section also includes the 'middle' box and the connection is before the cat, but when I search online for a replacement all I can find is a rear box that has a short pipe heading in the direction of the cat and does not include the middle box.
Can anybody tell me if this is correct, and if so, do I the need to cut the pipe to accommodate the replacement rear box ?

Thanks

don kalmar union · Oct 20th, 2018, 20:26

You can find the stainless replacement cat back that I stock here on my website:

http://kalmar-union.com/parts/volvo-...v70_-exhausts/

The price includes VAT and overnight delivery by TNT..... unless you pick it up and I will make a price reduction....

Don.

Cento16v · Oct 20th, 2018, 21:01

Yeah you have to cut it to replace the back box, Euro Car Parts pattern part Is as good as any, no flow issues on my BSR tuned 2.0T.

Buy some paste and a decent clamp.

Oct 20th, 2018, 10:20	#1
cantdecide New Member Last Online: Oct 20th, 2018 10:20 Join Date: Nov 2008 Location: high wycombe	S60 2.0T Exhaust, Rear box replacement Hi I have noticed today that the rear box on my 2002 S60 2.0T is blowing and on investigation it appears to be blowing at the weld (where the box meets the pipe) Without lifting the car fully, it looks as though the rear section also includes the 'middle' box and the connection is before the cat, but when I search online for a replacement all I can find is a rear box that has a short pipe heading in the direction of the cat and does not include the middle box. Can anybody tell me if this is correct, and if so, do I the need to cut the pipe to accommodate the replacement rear box ? Thanks

Oct 20th, 2018, 20:26	#2
don kalmar union Trader Last Online: Today 07:54 Join Date: Dec 2001 Location: Chesham, buckinghamshire	Ferrita stainless exhaust. You can find the stainless replacement cat back that I stock here on my website: http://kalmar-union.com/parts/volvo-...v70_-exhausts/ The price includes VAT and overnight delivery by TNT..... unless you pick it up and I will make a price reduction.... Don. __________________ Don.Norchi. MTE performance software , TME and Ferrita stainless exhausts, AP heavy duty clutch kits, KU single mass flywheels and LSDs. 01494 785508. email don@kalmar-union.com www.kalmar-union.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Oct 20th, 2018, 21:01	#3
Cento16v Member Last Online: Sep 13th, 2023 16:16 Join Date: Jul 2016 Location: Yorkshire	Yeah you have to cut it to replace the back box, Euro Car Parts pattern part Is as good as any, no flow issues on my BSR tuned 2.0T. Buy some paste and a decent clamp.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)