Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > Diesel Engines

Notices

Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines.

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

D5244T18 ECM repair/replace

Views : 233

Replies : 1

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Jun 22nd, 2024, 13:15   #1
ahp
New Member
 

Last Online: Jul 11th, 2024 22:59
Join Date: Jun 2012
Location: Armagh
Default D5244T18 ECM repair/replace

Hi My 2013 XC90 D5 has died while driving. Won't restart.
I had it recovered home and plugged in VIDA which had a lot of faults from battery getting drained from trying to restart. So charged battery and cleared all faults.
ECM-P003100 HO2S Heater Control Circuit Low comes up immediately (don't think this would prevent starting?)
After cranking I get additional codes:-
ECM-P200A84 Intake Manifold Runner Performance...
ECM-P200835 Intake Manifold Runner Control Circuit / Open..
ECM-P063800 Trottle Actuator Control Range/Performance
ECM-P040900 EGR Sensor
and further cranking
ECM-P020100/200/300/400/500 (all injectors open circuit faults)

I suspected in tank fuel pump - but it is not at fault - test with gauge and getting 7Bar at HP inlet.
I also notice the Swirl flap motor link was off and the motor not moving - tried spare - also not moving when switch on ignition.
I have got her to fire with Easy Start but does not run with out.
I have metered out the cables to ECM and all are good.
12V and GND to ECM all good
Vida shows following readings when cranking
ECM Fuel Pressure : 7690 kPa
ECM Fuel Pressure, nom value : 357670 hPa
ECM current through fuel pressure reg : 9ma - This is very low
ECM Metering unit MPROP output duty cycle : 95%

I bought a S/H rail to try plug in a reg valve to see if I can get more than 9mA - but not change

It looks like I am getting the correct high pressure to the rail but seems the injectors are not firing........
Why are all these other sensors throwing faults??
I am suspecting my ECM is at fault - any thoughts?
HELP

Last edited by ahp; Jun 22nd, 2024 at 13:52.
ahp is offline   Reply With Quote
Old Jul 9th, 2024, 22:21   #2
ahp
New Member
 

Last Online: Jul 11th, 2024 22:59
Join Date: Jun 2012
Location: Armagh
Default

Update.
After checking all fuses and wiring to all sensors from ECM I concluded it must be issue with ECM itself. Send of to be cloned into second hand ECM. When replacement fitted, tbe car fired up on first turn of the key.
Thanks to Cartech Electronics for fantastic service and getting me back on the road
ahp is offline   Reply With Quote
The Following User Says Thank You to ahp For This Useful Post:
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:27.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.