16t down pipe flange HELP

Hoggarth23 · Jul 29th, 2020, 21:41

wanting some advise on a 16t downpipe flange. Where to find one and what gasket goes between. Thinking having one made but not sure if it needs to be flat faced or machined out for the recess on the turbo.

TonyS9 · Jul 30th, 2020, 12:06

Its not the conical flange with the back clamp like the stock turbo?

Normally you just a weld on flange I think. Don't know if it needs a gasket or not, but the manifold doesn't use one.

Jimsiss · Jul 31st, 2020, 09:14

Did you not drop T5Sweep a PM like I said? He can do you one. Not sure if he can Counterbore it for you too though but anyone with a lathe can do that. I got mine from T5Sweep then counterbored it myself.

There isn’t meant to be a gasket but you can get them, I have one sat on my desk just in case, my brother looked it up at work (works in an A1 Motorstores branch).

classicswede · Jul 31st, 2020, 11:20

I have them in stock with the lip machined (also have gaskets)

https://www.classicswede.co.uk/TD04_..._20653958.aspx

Jimsiss · Jul 31st, 2020, 14:07

There are two flanges available for the 16T, straight flange and the angled flange, they are different so make sure you get the correct one.

Jul 29th, 2020, 21:41	#1
Hoggarth23 Junior Member Last Online: Nov 14th, 2021 23:09 Join Date: Jun 2020 Location: Warton	16t down pipe flange HELP wanting some advise on a 16t downpipe flange. Where to find one and what gasket goes between. Thinking having one made but not sure if it needs to be flat faced or machined out for the recess on the turbo.

Jul 31st, 2020, 11:20	#4
classicswede Trader Volvo in my veins Last Online: Yesterday 18:07 Join Date: Dec 2004 Location: Anglesey	I have them in stock with the lip machined (also have gaskets) https://www.classicswede.co.uk/TD04_..._20653958.aspx __________________ http://www.classicswede.org www.classicswede.co.uk

Jul 31st, 2020, 14:07	#5
Jimsiss Senior Member Last Online: Apr 12th, 2024 17:04 Join Date: Jul 2012 Location: Northwich	There are two flanges available for the 16T, straight flange and the angled flange, they are different so make sure you get the correct one. __________________ 940 B230FT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Jul 30th, 2020, 12:06	#2
TonyS9 Premier Member Last Online: Apr 9th, 2024 21:44 Join Date: Jul 2009 Location: Holywood	Its not the conical flange with the back clamp like the stock turbo? Normally you just a weld on flange I think. Don't know if it needs a gasket or not, but the manifold doesn't use one.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)