|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
OSR Lock problemViews : 257 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 14th, 2024, 10:28 | #1 |
Member
Last Online: Mar 1st, 2024 15:00
Join Date: Nov 2010
Location: London
|
OSR Lock problem
The door button comes up but the door only opens from the inside ,not from the outside.Is this a faulty lock ??
|
Feb 14th, 2024, 11:00 | #2 |
trying to be helpful
Last Online: Today 21:12
Join Date: Aug 2020
Location: Dagenham
|
*comment removed
sorry I read this the wrong way around ignore this .. only opens from inside .. doh try watching this it shows how all the linkages work https://www.youtube.com/watch?v=YmxLDSXNW0s around the 4:20 mark Last edited by stuart bowes; Feb 14th, 2024 at 11:06. |
The Following User Says Thank You to stuart bowes For This Useful Post: |
Feb 29th, 2024, 09:27 | #3 | |
Member
Last Online: Mar 1st, 2024 15:00
Join Date: Nov 2010
Location: London
|
Quote:
|
|
Feb 29th, 2024, 09:54 | #4 |
trying to be helpful
Last Online: Today 21:12
Join Date: Aug 2020
Location: Dagenham
|
far as I can tell it's just mechanical
also in accident I wouldn't want to be relying on any sort of solenoids or whatever to have someone get me out of the car.. so I'm hoping that's all it is in the video there are 2 rods from the handle down to the latch mechanism, one for the lock and one for the handle. what then happens at the latch I don't know.. Is one of those rods disconnected or damaged somehow.. without at least taking the door card off and shining a torch in there while someone pulls the handle a few times who can say |
The Following User Says Thank You to stuart bowes For This Useful Post: |
Mar 1st, 2024, 10:58 | #5 |
Lazy Member
Last Online: Today 15:02
Join Date: Mar 2007
Location: HORLEY
|
Hi.
https://www.youtube.com/watch?v=3yYtUnLiDeM
This link is for rear door... You will have to remove the door-card and insulation no matter what. You will then see if the metal rod from the door handle has become un-clipped or stripped from the blue plastic holder on the lock . If everything is still attached you can operate the handles to see if anything is jammed or bent . If the blue plastic holder has stripped out a little bit of glue and tie-wraps will work . If none of the above remove the lock , plug in the electrical connection and check the operation of the lock . |
The Following 2 Users Say Thank You to VOLVOBOY For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|