|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
Squeak sound changing gearViews : 6676 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 13th, 2013, 19:15 | #1 |
Senior Member
Last Online: Apr 2nd, 2021 09:08
Join Date: Aug 2011
Location: London
|
Squeak sound changing gear
This sounds strange but today my car started to make a rubbery squeaking sound changing to 1st 3rd or 5th gears. The sound comes from the console by the gear stick. Any ideas?
|
Feb 13th, 2013, 20:58 | #2 |
Member
Last Online: Yesterday 21:27
Join Date: Dec 2008
Location: Swindon
|
I had exactly the same issue on my '09 V70 D5. The noise was intermittent, I would start the car in the morning and it was quiet, then it would come several minutes later when reducing gear to take a turn. Asked at the dealer once what it could be but they wanted the car for longer to 'investigate' so I gave up.
In December last year it all stopped, no squeak since. |
Feb 13th, 2013, 21:01 | #3 |
Master Member
Last Online: Dec 28th, 2022 17:28
Join Date: Jul 2011
Location: Macclesfield
|
Probably the insulating material that separates the gear lever and linkage from the underside of the car. Providing it doesn't feel stiffer (ooer) than before it's probably nothing to worry about
|
The Following User Says Thank You to craigv60 For This Useful Post: |
Feb 13th, 2013, 22:13 | #4 |
Member
Last Online: Yesterday 20:18
Join Date: Apr 2006
Location: Sheffield
|
I had a similar noise which turned out to be the gear lever gaiter moving within the centre console trim. A bit of card wedged at the end was a temporary fix. The dealer "fixed" it at my service and 6 months later it dropped through the console-turns out they took it out, glued some foam on the sides and put it back but must have broken the plastic frame under the leather doing so. Still I now have a nice new snug fitting sports leather one supplied under warranty :-)
__________________
Current - MY23 V60 Recharge T6 Ultimate (AAOS) | Fusion Red Previous - MY19 V60 Momentum D4 | MY11 V60 Drive SE | MY08 V70 D5 SE Geartronic | MY06 S40 2.0D SE |
Feb 15th, 2013, 21:32 | #5 |
Senior Member
Last Online: Apr 2nd, 2021 09:08
Join Date: Aug 2011
Location: London
|
Thanks for the responses. i'll get it into volvo as my car was only serviced a month ago. Its really strange it only happened moving the gear stick forwards 1,3,5 and not back...
|
Aug 12th, 2014, 12:59 | #6 |
New Member
Last Online: Oct 26th, 2017 12:11
Join Date: Feb 2011
Location: Wantage
|
I've had this today,exactly the same issue only 1st, 3rd and 5th gears.
I've fixed it by taking off the side panels of the gear stick console and spraying some silicone grease down the gear cable sheath. This improved the squeak, but I could still feel it so I got a mate to push the stick into 3rd and neutral repeatedly. I traced the remaining squeak under the bonnet, the gear cables have a ball and socket type linkage, a liberal coating of lubricant while the stick was shifted soon stopped it. The linkage system is on the right hand side of the engine, near the bell housing. If someone is moving the stick while you look, you'll soon find it. Hope that helps anyone affected by this irritating noise. |
Dec 14th, 2017, 18:17 | #7 |
New Member
Last Online: Aug 18th, 2021 22:41
Join Date: Dec 2017
Location: Wellingborough
|
Hi Guys! I have exactly the same problem I have my car under AA warranty, do You think that will cover it or they refuse to pay for repair because wear and tear exclusion?
My car is over 60 k and they have right to do it. I have Volvo V40 2014 Thanks in advance. |
Dec 15th, 2017, 22:07 | #8 |
Master Member
Last Online: Sep 3rd, 2020 12:03
Join Date: Mar 2013
Location: Leicester
|
Had the same on my v60 whenever it went below 3 degrees. Its the gear selector cable in the sheath at the gear stick end creaking. Tried everything to sort it and eventually sorted it using silicone grease and spraying it down the inside of the sheath inside the car.
|
Dec 17th, 2017, 15:58 | #9 |
Premier Member
Last Online: Feb 4th, 2023 15:10
Join Date: Apr 2015
Location: uk
|
If you disconnect air mass meter then air filter box cables will be visible use while grease on both cables where rod goes into plastic this will cure remember do not have ignition on and no codes will get stored..
Regards |
Dec 31st, 2017, 09:57 | #10 |
New Member
Last Online: Jan 3rd, 2022 21:59
Join Date: Feb 2017
Location: hinckley
|
Hi
I have exactly the same problem.. did you get it sorted? I removed console side panels and sprayed silicone grease on the cable rods/plastic housing but it still happens intermittently. I may have to find the air mass meter and air filter box cables then... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|