|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Remove Dashboard GrilleViews : 581 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Jul 3rd, 2018, 05:06 | #1 |
Junior Member
Last Online: Nov 5th, 2020 20:29
Join Date: Nov 2016
Location: Bellevue
|
Remove Dashboard Grille
Removing the dashboard "speaker" grille out of the dash on P3 S80's ( this example is out of a '07 V8 )is fraught with ways to make a mess of your grille and dash. Do not try this with a screwdriver as you will put dents on the dash and most like it will slip and mar up the grille too.
Volvo wants you to use a special $35 tool but if you have a grinder you can make your own out of welding rod or an L shaped pick. Unfortunately you can`t use a cheap pick as it will bend from how thin it needs to be grounded. I ended grinding a Snapon There is a picture of how thin it needs to be ground. To remove the grille, take your tool and push it down parallel with the gap at the points I have marked in silver on the grille, as this is the area with the cutout, it will stop on it`s own after 1/2 inch. Then turn it 90 degrees so it catches underneath the cutout. Make sure to hold it firmly as you pull up. About the time you think it`s going to break a couple of clips will come loose. Then you can scoot the tool around and lift at the areas moving up. I suggest getting your fingers lifting as soon as possible to prevent damage with the tool. First pic is the handmade tool, the next 2 are the markings where to insert the tool. Pic 4 is the cutout for the tool as you turn it 90 degrees, the other end has a cutout too. Last is the location of the clips. Last edited by Thommykent; Jul 3rd, 2018 at 05:14. Reason: description |
The Following User Says Thank You to Thommykent For This Useful Post: |
Jul 11th, 2018, 22:12 | #2 |
Member
Last Online: Yesterday 23:34
Join Date: Apr 2018
Location: Newry
|
I can get mine out just fine using a small screw driver. It's ok if you take your time and gently does it!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|