Exhaust bore size

[dmiller]

Thanks for the update Dean!

[pierremcalpine]

Originally Posted by Dean1985

Ok so managed to fix it but could have made it a little easier for myself. if you use this on eBay item:251985669516 then cut as close to the flange on both sides this will work a treat. Access is limited with a grinder in this area and had to use a junior hacksaw to finish the last quarter on both cuts. If you can split the joint before you cut then you can unbolt the back box to cut the flange on this side so much easier. However the bolts are a PITA to take out due to corrosion and I ended up shearing one. So left it in situ and went the hacksaw route.

Oh man, that bit is perfect! Thanks for posting.

[Dean1985]

Originally Posted by pierremcalpine

Oh man, that bit is perfect! Thanks for posting.

It's what's the forum is about.

[sussexman]

hi can someone tell me the size of the front down pipe on a 2ltr v40 1998 has the pipe is cracked where it meets the flange so was thinking of cutting the flange of and the flange on the cat side and putting a clamp or flixe pipe on

[sussexman]

hi dean1985 i have a 2 ltr v40 1998 and need to put a exhaust clamp where the down pipe meets the cat gone on the flange do u know the size of the pipe or what size clamp i need