|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Polen filter removal/replacementViews : 1442 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 13th, 2010, 13:10 | #1 |
Master Member
Last Online: Feb 3rd, 2024 18:39
Join Date: Sep 2009
Location: Sunny Scotland
|
Polen filter removal/replacement
Guys
A quick photo guide (better than a VIDA line drawing) to the polen filter swap. Remove two torx T25 screws below the glove box, and remove trim panel. Remove 4 T25 screed from the filter box - the front two screws are easy - you will need a small torx or angle driver like the picture below to reach the back two screws. Pull down the filter as seen - this is a guide to replacement too - the new filter will have cuts in the side so that the filter bends on removal/insertion. Then, put it all back together! Hope that helps someone! David |
The Following 9 Users Say Thank You to BestGear For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|