|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Sat Nav Screen FlickerViews : 1549 Replies : 18Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 23rd, 2018, 23:07 | #11 |
Junior Member
Last Online: Nov 5th, 2020 19:29
Join Date: Nov 2016
Location: Bellevue
|
There is a special tool from Volvo that looks like a screwdriver bent into the shape of a fish hook you slide underneath and pull up on each corner. Volvo part number is 999-5919-46. I made my own.
Last edited by Thommykent; Jun 24th, 2018 at 00:08. |
Jun 24th, 2018, 21:08 | #12 |
New Member
Last Online: Jan 31st, 2020 07:13
Join Date: Jun 2018
Location: Kraków
|
Thank you so much! Yeah not ordering this hook - super expensive... Will make my own and post progress
|
Jan 27th, 2020, 20:43 | #13 |
Member
Last Online: Apr 22nd, 2024 19:24
Join Date: Aug 2010
Location: Gateshead
|
Any definitive answer to this? my own sat nav screen is blank, having the same difficulty removing the trim.
|
Jan 27th, 2020, 20:49 | #14 |
New Member
Last Online: Jan 31st, 2020 07:13
Join Date: Jun 2018
Location: Kraków
|
Hi
ok so after removing the grill it is mostly straight forward. Unscrew/ torx this and there you go. after I removed the whole unit I just disabled it and cleaned all wires/ connections/ cogs. After putting the unit together it worked like a charm. I guess it was just old/dirty good luck sir |
Jan 27th, 2020, 21:50 | #15 |
Member
Last Online: Apr 22nd, 2024 19:24
Join Date: Aug 2010
Location: Gateshead
|
Thanks for the info, however like the OP I can't seem to figure out how to remove the plastic trim, really don't want to damage anything by forcing something, I did try with a trim removal tool however nothing seemed to move.
|
Jan 27th, 2020, 22:07 | #16 |
Member
Last Online: Apr 22nd, 2024 19:24
Join Date: Aug 2010
Location: Gateshead
|
Apologies, just realised you are the OP.
|
Jan 28th, 2020, 07:38 | #17 |
New Member
Last Online: Jan 31st, 2020 07:13
Join Date: Jun 2018
Location: Kraków
|
I did it with force and after that I had to do some detailing as I damaged a bit of the metal mesh :/
|
Jan 30th, 2020, 20:31 | #18 |
Member
Last Online: Apr 22nd, 2024 19:24
Join Date: Aug 2010
Location: Gateshead
|
Finally got the grill off using a trim removal tool, thankfully no damage, must say though the clips holding it get one hell of a hold, onto fleabay now to find a screen.
|
Jan 31st, 2020, 07:13 | #19 |
New Member
Last Online: Jan 31st, 2020 07:13
Join Date: Jun 2018
Location: Kraków
|
Yeah I used removal tools as well but scratched it anyways :/ in regards to the screen - try to clean all the connections my screen looked like completely damaged
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|