|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
Information |
|
Removing 3 spoke Steering WheelViews : 1147 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 3rd, 2014, 17:14 | #1 |
Premier Member
Last Online: Aug 1st, 2015 09:34
Join Date: Oct 2013
Location: Southampton
|
Removing 3 spoke Steering Wheel
Ok - I'm aware of the guides etc, but I'm still having a complete mission getting my damn steering wheel to release the airbag so I can get it off. Completely halted everything I'm doing!!
So I'm aware of the daft little hole, but what can I stick in it to get the steering wheel to pop the airbag free? And what motion etc am I mean to do? |
May 3rd, 2014, 17:54 | #2 | |
Premier Member
Last Online: Nov 15th, 2022 21:34
Join Date: Apr 2010
Location: London / Essex
|
Quote:
__________________
Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba
|
|
May 3rd, 2014, 18:26 | #3 |
Sunny Days!
Last Online: Jun 6th, 2020 08:40
Join Date: Nov 2013
Location: Havant
|
I struggled like hell to do this the first time, the best thing to do is literally put a long thin screwdriver in pointing up 45 degrees to the centre of the wheel, slightly aim it to the left or right and feel for a clip, Then push the tip of the screwdriver down so it releases the clip enabling you to pull the airbag out (gently) the clips at the top could break though so be aware.
|
May 3rd, 2014, 19:08 | #4 |
Premier Member
Last Online: Aug 1st, 2015 09:34
Join Date: Oct 2013
Location: Southampton
|
Got it cracked now Thanks lads. Yeah absolutely bastard to get off! Did it in less than a minute this time lol. Forgot my screwdriver but had a Torx 27 so figured it would do lol. Pushed up on the clip and it still didn't move.
However I pushed the airbag in, Pushed up on the clip and the airbag then fell out as I removed my hand Lovely! Spend 20 minutes swearing at it earlier to later on 1 minute and it's off lol. Now to remove the dash....again.... |
May 3rd, 2014, 21:19 | #5 |
Junior Member
Last Online: Dec 6th, 2015 10:11
Join Date: Sep 2013
Location: Prescot
|
I got mine off easy I just used a Stanley knife and hacked the sides of the steering wheel apart and flipped the bar with my fingers hahaha Not recommended if you want to keep it.
__________________
May The Boost Be With You |
May 3rd, 2014, 22:01 | #6 | |
Premier Member
Last Online: Aug 1st, 2015 09:34
Join Date: Oct 2013
Location: Southampton
|
Quote:
Note to self - Do NOT keep Stanley knife in toolbox wants me to cut things more when stressed lol |
|
Nov 11th, 2019, 18:28 | #7 |
New Member
Last Online: Jan 22nd, 2024 14:48
Join Date: Sep 2006
Location: Ongar, Essex
|
Push!
I struggled with this for a bit, having read that the clip needs to be pushed up or down: based on this instruction I was making the mistake of trying to catch the edge of a clip to push it up or down in line with the steering column.
In fact, one needs to push straight in (towards the centre of the column). My advice is to get the largest flat bladed screwdriver that will fit comfortably into the hole, line up the blade of the screwdriver with the steering column and insert it into the hole (pretty well at right angles to the column, or parallel to the face of the steering wheel) until you hit metal. The metal is one side of a very large spring clip that pretty well encircles the column: several cm across. It takes quite a bit of pressure so make sure your screwdriver is solidly on the metal so it can't slip off and just push hard straight towards the centre of the column. The official instructions suggest that one should push down on the airbag at the same time, so if it's really stiff that might help, but I found this to be unnecessary once I had the confidence to apply sufficient pressure. I hope this helps someone! |
The Following User Says Thank You to GavinO For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|