Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > XC90 '02–'15 General

Notices

XC90 '02–'15 General Forum for the P2-platform XC90 model

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Window reset

Views : 52183

Replies : 32

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Aug 13th, 2012, 17:55   #1
gmonag
Premier Member
 

Last Online: Jan 15th, 2024 18:24
Join Date: Jun 2010
Location: Bury St Edmunds
Default Window reset

Thought I would share this little success.

My driver's window would not stay shut when auto-closing (one touch on the switch). However holding the switch for a couple of seconds after the window shut would keep the glass closed. This is annoying so I managed a reset. Some of the suggestions on this forum are not quite clear enough so this is what I did:

1. Key in ignition to position II
2. Close both driver and passenger windows using the driver door switches together and hold them for 5-8 sec after closing.
3. Then whilst holding the switches closed, turn off the ignition and remove the key.
4. Use the remote to lock/unlock/lock/unlock.

Worked for me!

Greg
gmonag is offline   Reply With Quote
The Following 7 Users Say Thank You to gmonag For This Useful Post:
Old Aug 13th, 2012, 21:54   #2
copperknob
Senior Member
 

Last Online: Oct 23rd, 2012 08:57
Join Date: Jun 2012
Location: scotland
Default

heres the volvo way to reset your windows front and rear.

put window to lowest point and hold button in down position for 10 seconds the put it in the up position and hold button up for 10 seconds this is called initialisation

cheers
copperknob is offline   Reply With Quote
The Following User Says Thank You to copperknob For This Useful Post:
Old Aug 13th, 2012, 22:00   #3
400-ascona
Premier Member
 
400-ascona's Avatar
 

Last Online: Mar 18th, 2024 16:26
Join Date: Mar 2008
Location: Derby
Default

Quote:
Originally Posted by copperknob View Post
heres the volvo way to reset your windows front and rear.

put window to lowest point and hold button in down position for 10 seconds the put it in the up position and hold button up for 10 seconds this is called initialisation

cheers
And neither unfortunately did this!

Rob
__________________
1997 V70R AWD, Saffron, Manual; Lotus Carlton; Ascona 400; Mini Cooper S Works; 4.2 Supercharged Range Rover; Land Rover Discovery 4; Suzuki GSF1200N; BMW R80/7; Velocette Venom; Daimler V8 250.
400-ascona is offline   Reply With Quote
Old Aug 13th, 2012, 22:09   #4
Marmitespreader
Master Member
 
Marmitespreader's Avatar
 

Last Online: Mar 24th, 2024 10:34
Join Date: Jun 2012
Location: Wales
Default

Try this:

1. Engage the auto-down function and remove fuse 11C/5 (for driver's side) or 11C/4 (for passenger side) (located in the driver's side dash fusebox) during window movement.

2. Install fuse back into position.

3. Engage the auto-up function and hold it engaged for 5 seconds after the window has reached the fully closed position.

4. Verify window is now working properly.

5. If this procedure does not work, a scan tool that can access the Passenger Door Module (PDM) and Drivers Door Module (DDM) will be needed.
--------
The auto up or down function will be engaged if the button is pulled to the second step. The first step is for manual operation. This procedure can be used for driver and passenger windows.


1. Ignition on pos.II
2. With fingers on the fuse puller on fuse#5 (LH door module) initiated Auto-up driver's window with LH door module button.
3. As soon as window reached top (and before it started to auto-down) pull the fuse.
4. Turned off ignition, and waited 30 seconds.
5. Replaced fuse.
6. Ignition back to pos.II.
7. Tried auto-down, did not work, only manual down worked, used manual down to get window all the way down.
8. Tried auto-up, did not work.
9. Got window to top with manual up.
10. Tried auto-down, worked!
11. Tried auto-up, WORKED!

This may also be required:
After step #9, hold the window switch up for 10 seconds before letting go. After completing this step, auto up/down worked but prior to holding the switch up, the auto up/down did not work.

Last edited by Marmitespreader; Aug 13th, 2012 at 22:12.
Marmitespreader is offline   Reply With Quote
The Following 10 Users Say Thank You to Marmitespreader For This Useful Post:
Old Jan 28th, 2013, 05:49   #5
donturkone
Junior Member
 

Last Online: Jan 22nd, 2024 10:38
Join Date: Jan 2013
Location: Klagenfurt
Default

I did this procedure but the fuses are nr 5 for driver door and nr 6 for passenger door... works perfectly now!!!
donturkone is offline   Reply With Quote
The Following User Says Thank You to donturkone For This Useful Post:
Old Jan 28th, 2013, 06:08   #6
donturkone
Junior Member
 

Last Online: Jan 22nd, 2024 10:38
Join Date: Jan 2013
Location: Klagenfurt
Default

I did this procedure but the fuses are nr 5 for driver door and nr 6 for passenger door... works perfectly now!!!
donturkone is offline   Reply With Quote
Old Aug 25th, 2015, 20:52   #7
Philim
New Member
 

Last Online: Aug 25th, 2015 20:52
Join Date: Aug 2015
Location: Brussels
Thumbs up Power window malfunction

Found this on another forum and worked great. Philip

"Every time your battery goes dead the auto windows need to be reprogrammed. It's easy to do. With the ignition on raise the window button up for one second, then release, then pull up on it against for one more second. This information is in your owners manual its on page 101."
Philim is offline   Reply With Quote
The Following User Says Thank You to Philim For This Useful Post:
Old Jul 16th, 2017, 09:10   #8
pthambly
Peaty Aitch
 

Last Online: Jul 16th, 2017 09:10
Join Date: Jun 2015
Location: Dartmoor
Default Drivers Door Window - Reset Worked!

Nice one Marmitespreader, drivers door window auto close function not working (window re-opening after getting to top/closed position and either dropping back a couple of inches or all the way back down).....followed points 1,2 3 & 4....sorted!!!

Many thanks!

Paddy

QUOTE=Marmitespreader;1226293]Try this:

1. Engage the auto-down function and remove fuse 11C/5 (for driver's side) or 11C/4 (for passenger side) (located in the driver's side dash fusebox) during window movement.

2. Install fuse back into position.

3. Engage the auto-up function and hold it engaged for 5 seconds after the window has reached the fully closed position.

4. Verify window is now working properly.

5. If this procedure does not work, a scan tool that can access the Passenger Door Module (PDM) and Drivers Door Module (DDM) will be needed.
--------
The auto up or down function will be engaged if the button is pulled to the second step. The first step is for manual operation. This procedure can be used for driver and passenger windows.


1. Ignition on pos.II
2. With fingers on the fuse puller on fuse#5 (LH door module) initiated Auto-up driver's window with LH door module button.
3. As soon as window reached top (and before it started to auto-down) pull the fuse.
4. Turned off ignition, and waited 30 seconds.
5. Replaced fuse.
6. Ignition back to pos.II.
7. Tried auto-down, did not work, only manual down worked, used manual down to get window all the way down.
8. Tried auto-up, did not work.
9. Got window to top with manual up.
10. Tried auto-down, worked!
11. Tried auto-up, WORKED!

This may also be required:
After step #9, hold the window switch up for 10 seconds before letting go. After completing this step, auto up/down worked but prior to holding the switch up, the auto up/down did not work.[/QUOTE]
pthambly is offline   Reply With Quote
Old May 15th, 2019, 20:16   #9
lee288
New Member
 
lee288's Avatar
 

Last Online: Aug 3rd, 2019 14:24
Join Date: Mar 2014
Location: York
Default

Quote:
Originally Posted by Marmitespreader View Post
Try this:

1. Engage the auto-down function and remove fuse 11C/5 (for driver's side) or 11C/4 (for passenger side) (located in the driver's side dash fusebox) during window movement.

2. Install fuse back into position.

3. Engage the auto-up function and hold it engaged for 5 seconds after the window has reached the fully closed position.

4. Verify window is now working properly.

5. If this procedure does not work, a scan tool that can access the Passenger Door Module (PDM) and Drivers Door Module (DDM) will be needed.
--------
The auto up or down function will be engaged if the button is pulled to the second step. The first step is for manual operation. This procedure can be used for driver and passenger windows.


1. Ignition on pos.II
2. With fingers on the fuse puller on fuse#5 (LH door module) initiated Auto-up driver's window with LH door module button.
3. As soon as window reached top (and before it started to auto-down) pull the fuse.
4. Turned off ignition, and waited 30 seconds.
5. Replaced fuse.
6. Ignition back to pos.II.
7. Tried auto-down, did not work, only manual down worked, used manual down to get window all the way down.
8. Tried auto-up, did not work.
9. Got window to top with manual up.
10. Tried auto-down, worked!
11. Tried auto-up, WORKED!

This may also be required:
After step #9, hold the window switch up for 10 seconds before letting go. After completing this step, auto up/down worked but prior to holding the switch up, the auto up/down did not work.
Thanks marmite spreader this has just got my auto-up working as it should after a few years of it not being as i am too tight to spend £50 to get it plugged in.

Car is a 2005 V70 D5 163bhp.

Thanks again.
lee288 is offline   Reply With Quote
Old May 15th, 2019, 23:56   #10
Harley Dave
Volvo Driver
 

Last Online: Yesterday 16:55
Join Date: Mar 2016
Location: Basingstoke
Default

I tried everything, problem was with both windows.

Eventually bought a pre-loved Dice/Vida/Laptop setup and voila! - Windows work fine now.

Cheers

Dave
Harley Dave is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 19:38.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.