|
Information |
|
Got splashed, now windscreen wipers don't work.Views : 583 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 17th, 2021, 21:20 | #1 |
New Member
Last Online: May 5th, 2022 21:22
Join Date: Jun 2017
Location: Ipswich
|
Got splashed, now windscreen wipers don't work.
Hi all,
I'm looking for advice on some errors we've had since getting splashed by a car coming the other way on the road. Splash was up to mid bonnet level. Windscreen wipers now not working, after not stopping at all. Got the AA out and had the fault codes: B113187 Control module wiper module. - missing message - permanent B129A88 LIN-bus "D" -Bus off -Permanent B10AD96 Rain sensor -Component internal failure -Permanent So I have cleaned the CEM unit with electric component cleaner, nothing looked corroded, plugged everything back in and still no response from wipers. After some research I see that the Rain sensor and wipers both run off the same wiring from the CEM. Is this something I can look at fixing myself? Hopefully just dry out some water that has leaked in somewhere in a wire joint from CEM to wiper/rain sensor. I don't have diagnostic tools myself. But I do now have an enormous can of electric cleaner leftover from the CEM scrubbing! My initial thought was to just replace the windscreen wiper motor as it has integral module but since the fault code highlights the rain sensor and LIN bus too, thought it would be a short somewhere. Oh sorry, forgot to say, it's a V40, 1.6 diesel, 2013. And it's black. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|