Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General
Register Members CarsBlogs Help Calendar Mark Forums Read


S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 models

  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and users. Forum owners such as us are finding that AOL, Yahoo and are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Crank sensor bracket

Views : 132

Replies : 2

Users Viewing This Thread :  

Thread Tools Display Modes
Old Feb 13th, 2019, 19:47   #1
New Member

Last Online: Mar 3rd, 2019 02:16
Join Date: Apr 2016
Location: eastbourne
Default Crank sensor bracket

Howdo all,,so I'll put this up,,just so u got in my car turned the key,did not start...!!?? stuck my autel al319 in diagnostic port,,,P0502 and P0336 came up,,not bothered to much about the first one,,,its maybe a ABS sensor (hopefully) .the P0336 crankshaft position sensor A circuit range/performance is now hopefully sorted as soon as I charge my battery (again hopefully) it just died from trying to start it,,,and I've heard these cars don't like low battery power..!!!,,,,its the bracket that was my problem as wen I put on new cranksensor on it,,it desolved into bits..!!!!! replaced the 25 bracket which is a PITA and got lucky,, will put up sum pic of it ,,got at one bolt ok,but the bolts behind the little aluminum block by chiseling a little bit of the 1in by 15mm aluminum block off and useing a smaller torx bit to the get in to the torx bolt so to give me a little bit of a angle movement and it worked,without taking so much more stuff off just to get to that bracket,,so if u ave this job to do hope it help...
Attached Images
File Type: jpg IMG_20190213_182906.jpg (249.9 KB, 18 views)
File Type: jpg _20190213_183010.jpg (291.3 KB, 18 views)
File Type: jpg _20190213_183111.jpg (166.8 KB, 16 views)
File Type: jpg _20190213_183314.jpg (241.0 KB, 17 views)
File Type: jpg _20190213_183554.jpg (280.8 KB, 16 views)
irollv40 is offline   Reply With Quote
Old Feb 14th, 2019, 13:25   #2
Premier Member

Last Online: Sep 18th, 2019 11:59
Join Date: Feb 2009
Location: Hackensack

Is this in the rear of the engine or the front? I can't "see" where it is.
Georgeandkira is offline   Reply With Quote
Old Feb 16th, 2019, 03:55   #3
New Member

Last Online: Mar 3rd, 2019 02:16
Join Date: Apr 2016
Location: eastbourne

Hi. So if u standing in front of car in front of engine its on ur right a little bit,, down were the engine block meets flywheel casing 2 wires coming out of it...

So I put a charge battery back in car turn the key and nowt,,turned over but no start,,,so check the wireing going to new cranksensor ,continue test=good earth but nowt,!!!! if any body got a wiring diagram for a 2002 v70 2.4T,,B5244T3 engine as I can not see were the wires go or any suggesting... Manythanks..

Last edited by irollv40; Feb 16th, 2019 at 03:57.
irollv40 is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 12:48.

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.