|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Connecting heater hosesViews : 367 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 21st, 2019, 15:34 | #1 |
VOC Member
Last Online: Oct 4th, 2022 16:02
Join Date: Jan 2016
Location: UK
|
Connecting heater hoses
Can anyone tell me the correct way to connect the two heater hose's, I ask because there seems to be conflicting opinions on this, I have just read in the FAQ'S that the hose from the stub in the cylinder head under the inlet manifold goes to the bottom stub on the bulkhead, and the hose from the top stub on the bulkhead goes to the red metal pipe under the exhaust manifold that goes to the water pump.
Then I read a old post on the forum on this and there it says the opposite, the hose from the bottom stub on the bulkhead going to the metal pipe, and the top stub the hose from that to the cylinder head stub, If anyone knows for sure which way they should be, can you please reply asap. Thank you in advance David. Forgot to say its a 940 without air con Last edited by 827Roverman; Sep 21st, 2019 at 15:37. Reason: forgot to say |
Sep 21st, 2019, 19:18 | #2 |
Premier Member
Last Online: Feb 11th, 2023 20:32
Join Date: May 2010
Location: Blyth, Northumberland
|
I have a 1992 940 estate. No AC, non turbo, 2.0 litre B200F engine.
I couldn’t remember as it is years since I replaced the heater valve so I had a look. On my car the hose from the top stub is routed behind the engine block and connects behind the block to the rigid red steel pipe from the back of the water pump. The hose from the lower stub also passes across the back of the engine block then turns through 180 degrees to join a stub on the left hand side of the block. Hope this helps. Ian. |
The Following User Says Thank You to Ian21401 For This Useful Post: |
Sep 22nd, 2019, 11:48 | #3 |
Senior Member
Last Online: Feb 8th, 2024 21:33
Join Date: Apr 2015
Location: Falaise
|
Hi David, what model car are we talking about here? (I recently installed hoses on a 1998 V90 and I can go outsie and take a look at my 1994 2.4 diesel, AC 940)
|
Sep 23rd, 2019, 10:39 | #4 |
VOC Member
Last Online: Oct 4th, 2022 16:02
Join Date: Jan 2016
Location: UK
|
Its a 1996 940 turbo B230FK without air con, but according to the FAQS section and a reply off IAN , I think I now know which way to run the hoses, unless someone knows different. Regards David.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|