Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > Diesel Engines

Notices

Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines.

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Euro 3 Volvo S50, 2.0D low power issue

Views : 360

Replies : 1

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Aug 9th, 2020, 11:28   #1
Sidonas
Junior Member
 

Last Online: Aug 28th, 2023 14:55
Join Date: Oct 2019
Location: Kaunas
Default Euro 3 Volvo S50, 2.0D low power issue

Good day,

I have a 2004 Volvo S40 2.0D. Ever since I bought it 4 years ago it hasn't felt like a true 100kW engine but it has never caused any troubles either - no smoking, no fuel consumption or starting issues. However, I have recently gotten more interested in it and wanted to see if I could get it to run the way it's supposed to.

I've bought a vida/dice system and looked around. There is not a single active diagnostic fault. However, the looking at the graphs of desired and actual boost pressures I've noticed that actual boost is all over the place and pretty much never near the desired value.

Here are the graphs:
https://m.imgur.com/a/LcDQUa3

What could be the cause of it? Is there anything else that I could do to narrow it down?

Thanks.
Sidonas is offline   Reply With Quote
Old Aug 20th, 2020, 23:34   #2
Vdx
New Member
 

Last Online: Dec 7th, 2020 21:40
Join Date: Jun 2020
Location: Highland
Default

If the PSA 2.0d has a vacuum controlled VNT turbo like the 1.6, the vacuum control of the VNT mechanism is the most likely cause but it could also be a minor boost leak.

If you locate the turbocharger in the engine bay there will be a small hose connected to the VNT actuator. If you have someone start the engine whilst you watch the actuator, the actuator arm will move from one end of its travel to the other; If the arm struggled to move the all the way or it doesn’t stay still in position and moves up and down there is a problem. If you follow the hose back it will lead to the vacuum control valve which is normally a small brown or black device with a pierburg logo, an electrical plug and some other hoses leading to the vacuum pump on the engine. You can diagnose this system by checking the hoses are intact and none have come off. To check the system holds vacuum you need a vacuum pump (like a mityvac, you can get cheap lookalikes on ebay/amazon), it can’t be properly tested by pressurising the hoses as sometimes hoses can collapse or pinch while under vacuum which will also cause problems. The vacuum control valve has a small foam filter inside that can be cleaned (videos on youtube). If the hoses are fine and cleaning the foam filter doesn’t help the valve itself may be faulty.

As for a boost leak you will hear some whistling under load which might be very faint. It might help to drive around with the windows open and have a listen. Sometimes intercooler hoses can be burst or slightly loose but will only properly leak under full boost pressure. This wont always log a fault code as the difference between desired and actual pressure does not exist for long enough. If I remember right you can search fault codes on VIDA such as an under-boost code and it will tell you what conditions need to be met for the ECU to log it, sometimes the required time can be quite long which won’t pick up slight differences or intermittent problems. In the engine bay you will see a misting of oil around hoses that have leaked as oil vapour from the breather hose travels through the intake system.
Vdx is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 15:08.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.