|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
What I did today thread...Views : 325513 Replies : 3020Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 29th, 2019, 18:15 | #2121 |
Premier Member
Last Online: Today 08:42
Join Date: Apr 2011
Location: Belfast
|
Woke up this morning to find my drivers side wing mirror smashed to pieces. Well and truly beyond repair. Behind my car I found the wing mirror cover of the car that had struck my S60. I wouldn't mind that much if I just had to replace the wing mirror, but the force of the impact has actually bent the metal behind the mirror on the door. Don't know if I need to replace just the mirror or the entire door.
__________________
1996 850 T5 - Sold 2003 S40 1.9d - Sold 2004 S60 D5 |
The Following 2 Users Say Thank You to Dancake For This Useful Post: |
Sep 30th, 2019, 18:02 | #2122 |
Member
Last Online: Jul 11th, 2022 17:57
Join Date: Apr 2016
Location: Cornwall, near Hayle
|
Depends how bent the metal is - small dents I heat up with a hair dryer and spray liquid oxygen or whatever on them and they pop out. Wing mirror replacement housing is a doddle but be careful with the plastic bit that attach trim
|
Sep 30th, 2019, 18:08 | #2123 |
Member
Last Online: Jul 11th, 2022 17:57
Join Date: Apr 2016
Location: Cornwall, near Hayle
|
Hmmmm...got in Gloria today. I wasn't sure whether to drive her but had a parking ticket on the Audi in St Ives yesterday. So, got in Gloria - raining, windows steamed up - I have been terrified of driving her lest another costly message pops up...
No messages!!!! However, the blower on the air con doesn't work... I drove her with the windows down. First appointment finished and I got in and the air con sprung into Life.... Back into the Audi, threw my coat into the back seat then couldn't open either back doors...spent £700 a couple of years back sorting the same issue.... Thought long and hard today about whether I should sell all of my cars and start getting buses instead. Then I saw a 64K V70 R AWD for £5K - automatic but I could get that ripped out from Gloria (her gearbox is fine), put all the other parts from Gloria in it and maybe it would work properly. I'm half Irish so that's the logic talking. |
Oct 4th, 2019, 11:54 | #2124 |
Master Member
Last Online: Apr 20th, 2024 07:18
Join Date: Jan 2011
Location: Warrington
|
Rebuilt the handbrake again after the cable on the off-side pulled through the expander stop. No damage to the cable but the expander had opened up to allow the cable to work through. I've managed to fix it for now but think I'll need to look at replacing both expanders (again) and take a closer look at the bullet ends on the replacement cables I fitted a few years back - it's possible that the bullet end, or the expander stop, is slightly rounded or tapered that results in the expander stop gradually opening up allowing the cable to eventually pull through.
__________________
Current cars: 2003 V70 D5 SE (MY2004); 2012 CRV 2.0i V-TEC; Gone but not forgotten: 2001 Honda HRV; 1989 VW Polo C Mk2; 2000 Honda Civic VTi Aerodeck ; Cavalier SRi; Cavalier LX; 1971 Triumph Spitfire Mk3; 1963 Triumph Herald. |
Oct 4th, 2019, 13:32 | #2125 | |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
Quote:
I only ever deal with genuine Volvo parts or ATE (who make the braking system) so it would be interesting to know what make of parts you're using. Some photos showing the problem would help too.
__________________
2002 S60 SE D5 Manual 209000 miles |
|
Oct 9th, 2019, 21:26 | #2126 |
Senior Member
Last Online: Mar 27th, 2024 06:04
Join Date: May 2017
Location: martock
|
Rear droplinks replaced and front lower vac engine mount replaced,what a mare. Bolts on droplinks were well on there had to use heat in the end. Engine mount wasn't to bad,in fact it took longer to do droplinks than the engine mount. All good in the d5 hood so far.
__________________
|
Oct 12th, 2019, 00:09 | #2127 |
Premier Member
Last Online: Jul 26th, 2021 21:24
Join Date: Jun 2013
Location: Coldnada
|
Just uploaded a video showing a few ways to open a stuck bonnet that won't open https://www.youtube.com/watch?v=HwOv6AIqxHY
__________________
Several Volvo Repair Videos https://www.youtube.com/playlist?lis...ECTts0FSVSOT_c |
Oct 25th, 2019, 17:45 | #2129 |
Member
Last Online: Jul 11th, 2022 17:57
Join Date: Apr 2016
Location: Cornwall, near Hayle
|
I don't know how but Gloria passed MOT but then the camshaft position sensor went so my engine was rocking backwards and forwards, Sorted that.
I have a low speed brake squeal so when the rain stops I need to take the wheels off (again). Went to fill up with petrol and the petrol cap wouldn't open, took the solenoid out and my hands will soon be covered in vaseline... ...oh, whilst parked a scaffolding truck reversed into my passenger door at slow speed causing 2 dents and 2 scratches so ordered some paint and one of those dent repair kits.., for when it stops raining. Changed reversing light bulbs as they decided to blow Currently have noises/knocks - cannot be suspension components as all of these are new - hoping the bumpers haven't been put on properly when the parking sensors were replaced a couple of weeks ago. |
Oct 26th, 2019, 12:47 | #2130 |
VAG 2.5 TDI
Last Online: Dec 18th, 2023 14:43
Join Date: Oct 2012
Location: RYE,EAST SUSSEX
|
Again?
yet another top motor mount replaced today,two in the last seven years,good job the parts are cheap 12 quid incl shipping from parts monster.
Start to finish about .75hr. two pics, one of the dead mount and another of the tool i made long ago(seven years infact lol)to aid pulling the new mount in , all done in situ.......it was made from an old transit crank damper center ,then ground away on one side to clear the EGR valve. NEXT!!!!!!
__________________
RYE,EAST SUSSEX,smuggling since the 13th century......... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|