Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General

Notices

S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Ecm 6805 and boost related issues

Views : 126300

Replies : 88

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Aug 24th, 2011, 16:30   #1
outnumbered
Lunatic from Wakefield
 
outnumbered's Avatar
 

Last Online: Apr 16th, 2023 07:33
Join Date: Dec 2004
Location: wakefield
Default Ecm 6805 and boost related issues

there seems to be a lot of the above rearing its ugly head so i have put together a list of what may be the culprit and a what to check and how to check..
first picture tells you what the code is with an explanation.
things to check are.
INTERCOOLER.
check the tell tale sign by looking under the front bumper you will see oil deposits and also by looking down in the engine bay between the engine and the cooling fan at the bottom, if you still suspect the INTERCOOLER you can have it presure tested insitu.
ENGINE MOUNTS.
front and rear. these receive vac at idle, over 1500rpm the are deactivated.to check these to see if they are leaking block them off and take it for a spin if you still get any issues then its not them.
VNT.
the vnt is activated by vac. to test to ensure the vacuum regulator and lever are working as it should you will need a MITTY VAC,
http://www.uktools.com/mityvac-auto-...2bcc01cbdb1ef7
this is better to get to from under the car on ramps, connect the mitty vac to the regulator in line and create a vacuum the arm should move freely until it stops if it does not there is too much carbon build up on the veins have a look here.
http://www.youtube.com/watch?v=UWyN5...eature=related.
if it is not smooth use the mitty vac to try and free it.carbon build up is the main culprit, italian tune up comes to mind.
TCV
turbo control valve, this is just to activate the engine pads, there is a direct feed from the vac pump to the TCV and then to the engine pads. to check if this is working if you have the volvo diagnostic kit there is a test you can do on there failing that you can hook a vac gauge in line one of these.
http://www.amazon.co.uk/Vacuum-Fuel-...4193334&sr=8-9.
at tickover it should read about 5 hg rev it past 1500rpm and the needle should not move on the gauge. the line in to the TCV from the vac pump should be approx 45 hg at 2500rpm.
TCG.
turbo control governor which is bolted to the engine see this post for identification.
http://www.volvoforums.org.uk/showthread.php?t=122032.
to test this connect vac gauge to out port on TCG in line and the reading should be approx at idle 5hg at 2000 rpm 43hg at 2500 rpm it drops down to 35 hg. there is also a test on vida to check that the VNT is working picture 2.
SOFT CHARGE AIR HOSE.
this is the hose that connects to the turbo check this post.
http://www.volvoforums.org.uk/showth...air+inlet+hose.
when it get old and goes soft excuse the pun it will under load squash and will restrict the air flow to the turbo. also check all other intake hoses.
INJECTOR TEST.
to ensure that you have no issues with the injectors have a leak of test done.
VAC PUMP.
this is situated at the side of the fuel injection pump, this provides vacuum to the TCV and the TCG, connect a vac gauge in line and the reading should be approx at 2500 rpm 45 hg.
FUEL FILTER.
change it
the above hg figures where taken from my car today and as far as i am aware i have no boost issues.
i hope that the above info will point you in the right direction of what to check and the possible fixes,ECM6805 is time consuming and if put into a garage could be expensive to rectify.good luck on your quest and hope that the above will help you .
thanks to all that have posted in the links that i have provided.
mike
Attached Images
File Type: jpg ecm 6805.JPG (106.3 KB, 267 views)
File Type: jpg vnt.jpg (168.9 KB, 266 views)
File Type: jpg turbo1.JPG (154.0 KB, 336 views)
File Type: jpg turbo2.JPG (181.2 KB, 262 views)
__________________
2012 volvo xc90 Executive
Buccaneer Bermuda 2021

Last edited by outnumbered; Aug 24th, 2011 at 17:22.
outnumbered is offline   Reply With Quote
Old Aug 24th, 2011, 17:21   #2
Genghis
Genghis
 

Last Online: May 12th, 2013 21:05
Join Date: May 2006
Location: Surrey
Default

Huge thanks - I'll take this done my local garage.

Eds - is there any chance we can make this a sticky as it's currently spread over numerous threads?
Genghis is offline   Reply With Quote
The Following User Says Thank You to Genghis For This Useful Post:
Old Aug 25th, 2011, 10:22   #3
wygant97
New Member
 

Last Online: Aug 25th, 2011 10:26
Join Date: Aug 2011
Location: perryville
Default

I'll take this done my local garage.


wygant97 is offline   Reply With Quote
Old Aug 31st, 2011, 10:58   #4
adey34
Junior Member
 

Last Online: Aug 12th, 2013 13:57
Join Date: Sep 2008
Location: warrington
Default

Top write up Mike!
adey34 is offline   Reply With Quote
Old Sep 14th, 2011, 04:49   #5
freeonrdavin
New Member
 

Last Online: Sep 14th, 2011 04:55
Join Date: Sep 2011
Location: Reevesville
Default

I'll take this done my local garage.



freeonrdavin is offline   Reply With Quote
Old Oct 12th, 2011, 19:46   #6
outnumbered
Lunatic from Wakefield
 
outnumbered's Avatar
 

Last Online: Apr 16th, 2023 07:33
Join Date: Dec 2004
Location: wakefield
Default

turbo clean. with instructions and vids thanks to Fred
http://www.volvoforums.org.uk/showth...=132550&page=9
__________________
2012 volvo xc90 Executive
Buccaneer Bermuda 2021
outnumbered is offline   Reply With Quote
Old Sep 28th, 2013, 09:59   #7
Dieselchugger
New Member
 

Last Online: Oct 7th, 2013 16:35
Join Date: Aug 2013
Location: bristol
Default

Had the dreaded limp mode issue on my V70 D5 - Read all the posts here and thought it might need a turbo clean etc.

Applied a little lateral thinking and used Redex for diesel in the next few tanks full - hey presto, all fixed and runs like new for less that £10.

If there's a problem try the simple things first ;-)
Dieselchugger is offline   Reply With Quote
The Following User Says Thank You to Dieselchugger For This Useful Post:
Old Mar 1st, 2015, 23:36   #8
BikerChrisV70
New Member
 

Last Online: Oct 19th, 2016 09:57
Join Date: Nov 2013
Location: Abingdon
Default

Quote:
Originally Posted by outnumbered View Post
there seems to be a lot of the above rearing its ugly head so i have put together a list of what may be the culprit and a what to check and how to check..
first picture tells you what the code is with an explanation.
things to check are.
INTERCOOLER.
check the tell tale sign by looking under the front bumper you will see oil deposits and also by looking down in the engine bay between the engine and the cooling fan at the bottom, if you still suspect the INTERCOOLER you can have it presure tested insitu.
ENGINE MOUNTS.
front and rear. these receive vac at idle, over 1500rpm the are deactivated.to check these to see if they are leaking block them off and take it for a spin if you still get any issues then its not them.
VNT.
the vnt is activated by vac. to test to ensure the vacuum regulator and lever are working as it should you will need a MITTY VAC,
http://www.uktools.com/mityvac-auto-...2bcc01cbdb1ef7
this is better to get to from under the car on ramps, connect the mitty vac to the regulator in line and create a vacuum the arm should move freely until it stops if it does not there is too much carbon build up on the veins have a look here.
http://www.youtube.com/watch?v=UWyN5...eature=related.
if it is not smooth use the mitty vac to try and free it.carbon build up is the main culprit, italian tune up comes to mind.
TCV
turbo control valve, this is just to activate the engine pads, there is a direct feed from the vac pump to the TCV and then to the engine pads. to check if this is working if you have the volvo diagnostic kit there is a test you can do on there failing that you can hook a vac gauge in line one of these.
http://www.amazon.co.uk/Vacuum-Fuel-...4193334&sr=8-9.
at tickover it should read about 5 hg rev it past 1500rpm and the needle should not move on the gauge. the line in to the TCV from the vac pump should be approx 45 hg at 2500rpm.
TCG.
turbo control governor which is bolted to the engine see this post for identification.
http://www.volvoforums.org.uk/showthread.php?t=122032.
to test this connect vac gauge to out port on TCG in line and the reading should be approx at idle 5hg at 2000 rpm 43hg at 2500 rpm it drops down to 35 hg. there is also a test on vida to check that the VNT is working picture 2.
SOFT CHARGE AIR HOSE.
this is the hose that connects to the turbo check this post.
http://www.volvoforums.org.uk/showth...air+inlet+hose.
when it get old and goes soft excuse the pun it will under load squash and will restrict the air flow to the turbo. also check all other intake hoses.
INJECTOR TEST.
to ensure that you have no issues with the injectors have a leak of test done.
VAC PUMP.
this is situated at the side of the fuel injection pump, this provides vacuum to the TCV and the TCG, connect a vac gauge in line and the reading should be approx at 2500 rpm 45 hg.
FUEL FILTER.
change it
the above hg figures where taken from my car today and as far as i am aware i have no boost issues.
i hope that the above info will point you in the right direction of what to check and the possible fixes,ECM6805 is time consuming and if put into a garage could be expensive to rectify.good luck on your quest and hope that the above will help you .
thanks to all that have posted in the links that i have provided.
mike
Thanks Mike
I have a V70 D5 163bhp 2004 with around 115k. I had the dreaded ECM6805 code diagnosed by a local garage but they weren’t sure how to resolve the issue as Volvos are not their specialism. Booked the car in with the main dealer who confirmed the code running a diagnostics and investigation (costing £60) to test the vac lines which showed no issues and suggested I rebook the car in for a further diagnostics assessment by the Master Technician (who was on holiday at the time of the first visit). I declined their offer of paying a further £100 and decided to carry out searches on the web and I landed at the Volvo Forum. I came across your post with what seemed to be a very useful guide/checklist to work through which would hopefully eliminate the problem and restore the V70 D5 back to its former best. I am not a mechanic and am going through a steep learning curve.
As I was on a tight budget, the first job I decided to tackle bizarrely (for the cost of the gasket set) was to get the turbo out and give the internals a de-coke. Having read up how to do it (I did find a really good set of step by step instructions) ... how hard could it be! 12 hours later job done. Fire up the engine, sounds fine and took car for a spin. Wonderful, accelerate hard and pulled like a train. Revved well past the 2500rpm problem point and no sign of any problems ... for about 3 weeks. Then the problem came back. That was last October. More surfing the web as a result.
I have recently invested some more time and money trying resolve the problem including the following new parts:
1. New Turbo Control Governor (operating the turbo actuator)
2. New Turbo Control Valve (for the engine mounts)
3. All the small bore rubber vacuum pipes replaced with silicone hoses (used 5mm int dia).
I have invested in a Mity Vac as identified in your article to check all the vac pipe pressures and this is now where I hit a strange anomaly. According to your article the main vac pressure at idle should be around 45 Hg. My Mity vac only goes up to 30 Hg but I only get an idle pressure of 22 Hg. Revving up to 2500rpm this figure rises slightly to 24.5 Hg and doesn’t go any higher.
Using the Mity in line between the TCV and the engine mount at idle is 22 Hg (which give the softer engine mounts). Increasing the revs above around 1100rpm the reading drops to 0 Hg (meaning harder mounts) and doesn’t change once over 1200rpm.
Working from underneath (it seemed easier) I connected directly to the VNT and the arm moves pretty smoothly in and out using the Mity vac. I did this several times just to make sure. Then connecting the Mity in line with the VNT I get the following readings. At idle 22 Hg, at 1500rpm 21Hg, at 2000rpm 14 Hg, 2500rpm 11 Hg, 3000rpm 8 Hg and at 3500rpm around 6 Hg. It is these readings on the VNT side of the TCG that baffle me. The article I says the reading at idle is 5Hg, at 2000rpm 43Hg and at 2500rpm 35Hg. My readings seem to do the complete opposite curve.
I thought I was very systematic in changing all the vac pipes by only changing one length at a time to avoid mixing up which vac pipe connected to the inlet and outlet ports on the TCV and TCG. Is it possible that I have still managed to transpose them somehow? For ease of identification I even used different colour silicone hoses for the turbo pipe and vac inlet.
A test run in the car after changing the vac lines, TCG and TCV has made no difference under hard acceleration. Under very gentle acceleration building up the revs in 4th very very slowly on a long stretch of dual carriageway we got to 3500rpm with no issues. Once I had eased off and then tried to overtake ‘with gusto’ same old problem .... instant limp mode which is real a problem halfway through overtaking!
The next item on the list to change seems to be the turbo fresh air intake hose. My local dealer has offered me the bottom hose only for a mere £74 or the entire hose from the air box to the turbo for £93 including the metal section. To ease the pain (his words) he was prepared to offer a 10% discount to me. I have seen the bottom hose (not OEM) on Ebay for £28. The dealer also said he often sells a sensor (£93) on the intercooler outlet pipe at the same time when people are replacing the turbo air inlet pipes. I’ve not seen any mention of this on any of the posts that I have read. Anybody come across this one?
Any help, comments or advice on any of the above would be appreciated. I’m running out of ideas (and money) to resolve this matter to a successful conclusion.
BikerChrisV70 is offline   Reply With Quote
Old Feb 4th, 2016, 09:39   #9
NoControl
New Member
 

Last Online: Mar 5th, 2016 09:49
Join Date: Feb 2016
Location: Tartu
Default

Quote:
Originally Posted by BikerChrisV70 View Post
Thanks Mike
I have a V70 D5 163bhp 2004 with around 115k. I had the dreaded ECM6805 code diagnosed by a local garage but they weren’t sure how to resolve the issue as Volvos are not their specialism. Booked the car in with the main dealer who confirmed the code running a diagnostics and investigation (costing £60) to test the vac lines which showed no issues and suggested I rebook the car in for a further diagnostics assessment by the Master Technician (who was on holiday at the time of the first visit). I declined their offer of paying a further £100 and decided to carry out searches on the web and I landed at the Volvo Forum. I came across your post with what seemed to be a very useful guide/checklist to work through which would hopefully eliminate the problem and restore the V70 D5 back to its former best. I am not a mechanic and am going through a steep learning curve.
As I was on a tight budget, the first job I decided to tackle bizarrely (for the cost of the gasket set) was to get the turbo out and give the internals a de-coke. Having read up how to do it (I did find a really good set of step by step instructions) ... how hard could it be! 12 hours later job done. Fire up the engine, sounds fine and took car for a spin. Wonderful, accelerate hard and pulled like a train. Revved well past the 2500rpm problem point and no sign of any problems ... for about 3 weeks. Then the problem came back. That was last October. More surfing the web as a result.
I have recently invested some more time and money trying resolve the problem including the following new parts:
1. New Turbo Control Governor (operating the turbo actuator)
2. New Turbo Control Valve (for the engine mounts)
3. All the small bore rubber vacuum pipes replaced with silicone hoses (used 5mm int dia).
I have invested in a Mity Vac as identified in your article to check all the vac pipe pressures and this is now where I hit a strange anomaly. According to your article the main vac pressure at idle should be around 45 Hg. My Mity vac only goes up to 30 Hg but I only get an idle pressure of 22 Hg. Revving up to 2500rpm this figure rises slightly to 24.5 Hg and doesn’t go any higher.
Using the Mity in line between the TCV and the engine mount at idle is 22 Hg (which give the softer engine mounts). Increasing the revs above around 1100rpm the reading drops to 0 Hg (meaning harder mounts) and doesn’t change once over 1200rpm.
Working from underneath (it seemed easier) I connected directly to the VNT and the arm moves pretty smoothly in and out using the Mity vac. I did this several times just to make sure. Then connecting the Mity in line with the VNT I get the following readings. At idle 22 Hg, at 1500rpm 21Hg, at 2000rpm 14 Hg, 2500rpm 11 Hg, 3000rpm 8 Hg and at 3500rpm around 6 Hg. It is these readings on the VNT side of the TCG that baffle me. The article I says the reading at idle is 5Hg, at 2000rpm 43Hg and at 2500rpm 35Hg. My readings seem to do the complete opposite curve.
I thought I was very systematic in changing all the vac pipes by only changing one length at a time to avoid mixing up which vac pipe connected to the inlet and outlet ports on the TCV and TCG. Is it possible that I have still managed to transpose them somehow? For ease of identification I even used different colour silicone hoses for the turbo pipe and vac inlet.
A test run in the car after changing the vac lines, TCG and TCV has made no difference under hard acceleration. Under very gentle acceleration building up the revs in 4th very very slowly on a long stretch of dual carriageway we got to 3500rpm with no issues. Once I had eased off and then tried to overtake ‘with gusto’ same old problem .... instant limp mode which is real a problem halfway through overtaking!
The next item on the list to change seems to be the turbo fresh air intake hose. My local dealer has offered me the bottom hose only for a mere £74 or the entire hose from the air box to the turbo for £93 including the metal section. To ease the pain (his words) he was prepared to offer a 10% discount to me. I have seen the bottom hose (not OEM) on Ebay for £28. The dealer also said he often sells a sensor (£93) on the intercooler outlet pipe at the same time when people are replacing the turbo air inlet pipes. I’ve not seen any mention of this on any of the posts that I have read. Anybody come across this one?
Any help, comments or advice on any of the above would be appreciated. I’m running out of ideas (and money) to resolve this matter to a successful conclusion.
Have you sorted out the TCG readings, because I got the same results what were opposite with the Mike readings?
NoControl is offline   Reply With Quote
Old Apr 23rd, 2016, 23:46   #10
dacvolvo
eVolvolution
 
dacvolvo's Avatar
 

Last Online: Jul 26th, 2023 21:43
Join Date: Dec 2001
Location: Glasgow / Kilmarnock
Default

http://www.volvoforums.org.uk/showth...ghlight=Engine

Everyone loves photos, right? 😀
dacvolvo is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 21:58.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.