|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
15g turbo upgradeViews : 874 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 13th, 2020, 20:44 | #1 |
Junior Member
Last Online: Jun 24th, 2020 13:07
Join Date: Jan 2019
Location: Northampton
|
15g turbo upgrade
Ive managed to get hold of a td04 15g with a straight exhaust housing. My question is will the conical exhaust mate to it and seal? Or will i need to replace the flange with one from an 850?
Also does anyone have a picture of one clocked with a modified actuator bracket? |
Jan 13th, 2020, 21:21 | #2 |
Senior Member
Last Online: Mar 1st, 2024 08:41
Join Date: Mar 2009
Location: London
|
clocking wise this is what I have for my 19T.
https://lucacarmods.com/shop/turbo/w...et-volvo-b230/ Royal PITA to make the wastegate work correctly without it. I thought for a 15g to fit a 940 down pipe you need a turbo from the early 850 t5 conical
__________________
Volvo 940 19T, Charge cooled, Chipped. |
The Following User Says Thank You to mhuk For This Useful Post: |
Jan 14th, 2020, 15:06 | #3 |
Junior Member
Last Online: Jun 24th, 2020 13:07
Join Date: Jan 2019
Location: Northampton
|
Thanks, i may resort to buying one of those if i cant knock anything up to mount it.
In regards to the exhaust i couldnt find one with the matching conical hot side, this one popped up for a good price so ill have to make do. I just need to know if i can seal the conical downpipe or need to buy a new flange before i swap it |
Jan 19th, 2020, 11:39 | #4 |
Master Member
Last Online: Today 07:47
Join Date: Nov 2012
Location: London and Cambridge
|
You’ll need to do something with the top of the downpipe as the comical downpipe won’t bolt onto a flat flange turbo. You could cut the top off the downpipe and weld on another flange, or keep searching for a comical housing.
Classic swede used to supply these adapter plates, but appears to be out of stock - perhaps try emailing to see if they’re going to be restocked? https://www.classicswede.co.uk/Flat_..._19957914.aspx Cheers |
The Following User Says Thank You to Bugjam1999 For This Useful Post: |
Jan 19th, 2020, 21:37 | #5 |
Junior Member
Last Online: Jun 24th, 2020 13:07
Join Date: Jan 2019
Location: Northampton
|
Thanks for that ill get a flange ordered i think
|
Jan 20th, 2020, 18:31 | #6 |
Trader Volvo in my veins
Last Online: Yesterday 22:57
Join Date: Dec 2004
Location: Anglesey
|
They should be back in stock later this week
|
The Following User Says Thank You to classicswede For This Useful Post: |
Jan 20th, 2020, 19:00 | #7 |
Senior Member
Last Online: Today 07:22
Join Date: Jul 2012
Location: Northwich
|
I made my own CAD designs for my Turbo clocking adapter and the flange then had T5sweep laser cut them from stainless for me. I then adapted the plate to fit the turbo correctly and counterbored the exhaust flange on my lathe. Then I built the rest of the exhaust to go with it
__________________
940 B230FT |
The Following User Says Thank You to Jimsiss For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|