|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Fitting rear quarter window trims?Views : 384 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 15th, 2020, 14:02 | #1 |
Master Member
Last Online: Mar 23rd, 2024 13:47
Join Date: Dec 2010
Location: Winchester
|
Fitting rear quarter window trims?
Hi All,
Can anyone explain / offer a procedure for adding the little quarter radius chrome trims the go around the bottom of the rear side windows? The window is in place with the seal around it, but minus trim. Does the window need to come out to fit?
__________________
1971 1800E, 2019 XC40 D3 |
Nov 15th, 2020, 21:15 | #2 |
Junior Member
Last Online: Mar 16th, 2024 17:10
Join Date: Jun 2020
Location: Beekdaelen
|
Hi,
you will have seen the holes in the trims to fix them, and thinking about the trim in position you will notice these holes only can be reached removing the glass and seal. You might succeed in sliding the trims under the seals and let them stick this way, but I don't know somebody who did it this way. |
The Following User Says Thank You to Nullifie For This Useful Post: |
Nov 15th, 2020, 22:30 | #3 | |
Master Member
Last Online: Mar 23rd, 2024 13:47
Join Date: Dec 2010
Location: Winchester
|
Quote:
Are screws or other clips required to secure them?
__________________
1971 1800E, 2019 XC40 D3 Last edited by Volvo6; Nov 15th, 2020 at 23:46. |
|
Nov 16th, 2020, 07:31 | #4 |
Junior Member
Last Online: Mar 16th, 2024 17:10
Join Date: Jun 2020
Location: Beekdaelen
|
I have seen small flat srews and rivets used, both will do, but I would prefer srews for being able to determine the tension the trim is pressed to the body with them. No clips needed. New trims could be without holes.
|
The Following User Says Thank You to Nullifie For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|