|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Instantaneous, full battery dischargeViews : 906 Replies : 18Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 11th, 2021, 19:52 | #11 |
bob12
Last Online: Yesterday 12:25
Join Date: Aug 2006
Location: Woking
|
Just looked on the Tanya (Lucas) website and looking like they are no longer supporting lead-acid batteries as items discontinued and for the 745 its a lead/calcium jobbie!
Bob |
The Following 2 Users Say Thank You to bob12 For This Useful Post: |
Oct 11th, 2021, 20:23 | #12 | |
Premier Member
Last Online: Yesterday 21:57
Join Date: May 2012
Location: Lakenheath
|
Quote:
As for the USB device, the calibration of those isn't great - i have two similar devices, one is a twin charging USB port with built-in voltmeter and the other is a combination voltmeter, clock and internal/external thermometer. Both are aftermarket items from Chinabay. At 14.0V battery/system voltage, the latter of the two items reads 13.7-13.8V, at system voltage of 14.4V it reads 14.4V. The other one can read anything up to 1V above the system voltage so i've seen it reading 16.1V but when the voltage drops to 13.7-13.8V, it's accurate - lower than that it shows 11.6 when the battery is showing 12.2V. For reference, the former of these is on a system that charges at 14.4-14.0V and the latter on 15.1-14.7V, originally the latter was also 14.4-14.0V but i've boosted it to cope with the calcium battery that landed when i ordered a non-calcium variety.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Oct 11th, 2021, 20:56 | #13 | ||
Senior Member
Last Online: Yesterday 21:04
Join Date: Dec 2013
Location: Wiltshire
|
Quote:
I will check current (electricity pun) battery to see if it is silvery. Quote:
Cheers, F |
||
The Following User Says Thank You to Foeux For This Useful Post: |
Oct 12th, 2021, 10:59 | #14 | |
Premier Member
Last Online: Mar 4th, 2024 00:49
Join Date: Jul 2009
Location: Holywood
|
Quote:
As for the calcium battery story, there are differing information sources on the internet. Daves wikipedia entry link features a curcular reference, whereby the wiki references an article page and the article page references the wiki page, I consider it untrustworthy. The story which makes more sense to me is that calcuim batteries have a higher charge "tolerance" than antimony batteries. This what experts like Yuasa say, meaning it works fine with lower voltage charge systems, it just charges slower than in modern cars designed for it. I use a Bosch S4 for several years in mny 360, and have now moved this to my daily 940. Its an excellent battery. I have had problems with my charging system running slowly (on a lead antimony battery), but this was due to voltage drop and resistance in the joints, the lights were also noticable dimmer than they should be. Fixing the charging restored the lights too. Last edited by TonyS9; Oct 12th, 2021 at 11:23. |
|
The Following 2 Users Say Thank You to TonyS9 For This Useful Post: |
Oct 12th, 2021, 12:03 | #15 | |
Premier Member
Last Online: Mar 4th, 2024 00:49
Join Date: Jul 2009
Location: Holywood
|
Quote:
There are many reference by trustworthy sources explaining that the calcium change increases the charge tolerance, this does not increase the starting charging voltage. 12V batteries will start charging at any voltage above about 12.6V or so, its just very slow. If there is energy going into the battery it is charging. Even the dodgy wiki states that the problem is the battery not getting fully charged, not that it starts charging at a higher voltage. It will not get fully charged simply if it is not given enough time to charge. This is a common today in new car bought by pensioners who drive the car for 5mins to the shop. The history seems to be a vehicle manufacturer (Ford) stating that you cannot fit other types of battery other than the one supplied by them (requiring a specific calcium chemistry). There are many online reference specifically dissagreeing with this and that it is classic anti-repair misinformation. There are also a number of people experiencing charging problems with newer batteries, this guy tells you all you need to know'; "I'm just going to ignore the science, we don't need facts", he then goes to show his charging system is working at 13V-13.7V, which he thinks is normal (although he doesn't show the load state of the electrical system, possibly this is just at idle with no other loads). He blames the battery because its calcium, and upgrades his charging system to 14.5V and for some reason his high load loses are now only 0.4V instead of around 1V. His system is now working at the voltage it was intended for some of the time, other times its higher than it should be (14.1-14.5). Possibly it was just his brush/regulator module that was the problem. https://youtu.be/RQFttbZnIfw |
|
The Following User Says Thank You to TonyS9 For This Useful Post: |
Oct 12th, 2021, 12:42 | #16 | |
Premier Member
Last Online: Yesterday 21:57
Join Date: May 2012
Location: Lakenheath
|
Quote:
You are correct that we have debated it before Tony, however you are incorrect in almost everything else you state. Firstly the nominally 12V battery fitted to most of our cars is 6 cells, each of 2.2V each = 13.2V. To even get those to charge, the voltage needs to be a minimum of 0.1V per cell above that, viz 13.8V but to get the battery to the gassing point which it needs to do to desulphate, it needs to be in the region of 14.4-14.0V consistently. Using silver-calcium as a coating on the plates of lead-acid batteries instead of lead-antimony increases the gasing voltage by ~0.1V per cell so 15.1-14.7V to charge at the gassing point. Without reahing the gassing point, the battery will sulphate rapidly, rendering it fairly useless in very short order. If i'm so wrong about this, why have so many manufacurers increased the charging voltages on their vehicles to cope with calcium technology batteries? They have been in use for ~25 years now and caught me out at first but i was 25 years younger then and found someone somewhat older that had already encountered them and was explained the facts to by them. These facts have not changed in a quarter of a century and neither have the laws of physics. For other batteries that do not require any desulphation techniques during recharging, what you say is likely to be correct - however for automtive batteries and similar, it's not. As for calling the wiki article dodgy, there are many of them, each giving similar information, are they all dodgy? As for the YT guy saying he's going to ignore the science, i'd call him a congenital halfwit but that would be over-generous by at least 7/16!
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
Oct 12th, 2021, 14:33 | #17 | |
Premier Member
Last Online: Mar 4th, 2024 00:49
Join Date: Jul 2009
Location: Holywood
|
Quote:
The datasheets for Bosch S4 and S5 both state for standard charging (meaning continuous) that 14.4V is the "maximum". Sadly most battery datasheets are rather limited, it seems this information is privelaged, but I can say for certain that either Bosch batteries have reduced their charging range or they are perfectly compatible with old volvos despite them using Calcium. https://www.ez-catalog.nl/Asset/3c4b...-S5-007-EN.pdf My experience also says they work just fine, if you have a reasonably well working charging system, even over short journeys. The reason I provided the halfwit link was to show a potential explanation for this "belief". Its more common now for old cars to have calcium batteries and faulty/poorly performing charging systems. Due to this type of misinformation rip-off mechanics will simply sell you a new battery, blame the calcium until you come back a year later with the same problem with a different battery that has calcium but doesn't state it. There are also a number of different kinds, Yusas talk about Silver Calcium and Calcium/Calcium. It looks to me like all batteries now are Calcium instead of Antimony due to the reduced temperature aging characteristics, and increased voltage tolerance. The lastest types being AGM and EFB for start stop use, and you will want to drive those as hard as possible for recharging. While it is hard to prove one way or another, I do think if there was a difference it would have to be stated in the datasheet. That is where the court will draw the line in a claim. |
|
The Following 2 Users Say Thank You to TonyS9 For This Useful Post: |
Oct 12th, 2021, 16:08 | #18 | |
Premier Member
Last Online: Yesterday 21:57
Join Date: May 2012
Location: Lakenheath
|
Quote:
The trouble is, most mechanics and most independent car accessory/spares shops don't actually know the correct charging voltage for calcium batteries. I had this argument with the owner of my local car accessories/spares shop and explained it to him and he wouldn't have it, kept insisting the customers alternator was faulty. I suggested a "normal" lead-acid battery with lead-antimony in stead and the next time i went in, the owner made a bee-line for me and thanked me for helping and apologised for not believing me. He had apparently got his battery rep to check and what i'd told him was confirmed after the rep found out as he didn't know at first. For the record, i have diagnosed many charging faults, stripped and reconditioned (not rebuilt, there's a big difference!) many alternators, starter motors and other things. When i say "many" i don't mean 50 or 100 but thousands that i never kept count of. During the various processes of testing and reconditioning, each alternator was tested on a test bench, purpose built for the job to maximum output and if the alternator on test didn't achieve 14V at maximum output, it wasn't working correctly. Please note this was before "smart" alternators that detect by some witchcraft i haven't looked into whether they have a "normal" or calcium battery and adjust the output voltage accordingly. As for buying an "adjustable" voltage regulator for that Bosch alternator in that video, there is a more cost effective solution which is to cut the earth tag off the regulator and replace it with a 10A rectifier diode, forming a loop on the end to replace the ring on the end of the earth tag. It's fiddly to do but saves a few £££ but needs no separate setting up. I did similar on my Rover alternator but as that is battery sensed and not machine sensed, i could do it by cutting the battery sense wire, fitting a 2-pin Supaseal socket and using two plugs, one with a simple wire link and the other with a 10A rectifier diode in it. With this arrangement i can switch between 14.4-14.0V (standard output) and 15.1-14.7V (boosted voltage for calcium battery) but as i currently have a calcium battery on the ROver, i'm obviously running with the boost diode in. If/when i need to do the same to the Volvo, that's the method i'll use.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following User Says Thank You to Laird Scooby For This Useful Post: |
Oct 14th, 2021, 20:08 | #19 |
Senior Member
Last Online: Yesterday 21:04
Join Date: Dec 2013
Location: Wiltshire
|
Evening chums,
I am keen to sort this but there has been no problem since the last. At the weekend I will begin to figure it out and until then, I have a new battery in the footwell and a jumpy box and jump leads. Cheers, F |
The Following 2 Users Say Thank You to Foeux For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|