Auto stop start

[Geordiesteve]

Thanks guys appreciate the replies.
I will see how it goes.
It did come on this morning which was the first time, so hopefully as you say its possibly with it stood in the pound and just needs charging.

I've got loads of stuff wana ask. As I better posting a new post or just adding to this one 🤷*♂️

[MikeGMT]

Problem is the thread title, unless you can edit it. Start a new one, "Geordiesteves' Questions", maybe!

[Haldex]

Originally Posted by Clan

They have lowered the cold temperature cut off from the older model I see.
It makes you wonder if it will ever work looking at all those exemptions 🙄

I wish it were like this.. Mine somehow works perfectly in all conditions..

[cassell]

Mine works perfectly once the car is warmed up, to be honest I often switch it off in heavy traffic congestion as it does become a bit annoying, just my opinion and saving a bit of wear and tear on the starter motor!

[Haldex]

I developed a routine: 1. Close the door, 2. Start the car, 3. Put it in Dynamic, 4. Seatbelt, 5. Enjoy a hassle-free ride.

[WhatNext?]

A quick flick of the gear lever to manual and back to auto temporarily disables stop/start ... useful when you know you are a junction or you know you are not going to be at a standstill for more than a few seconds

[VOLVOL0VER]

Originally Posted by Haldex

I developed a routine: 1. Close the door, 2. Start the car, 3. Put it in Dynamic, 4. Seatbelt, 5. Enjoy a hassle-free ride.

hehehe 👍

[VOLVOL0VER]

Originally Posted by cassell

Mine works perfectly once the car is warmed up, to be honest I often switch it off in heavy traffic congestion as it does become a bit annoying, just my opinion and saving a bit of wear and tear on the starter motor!

mine works also 100% 👍

[WhatNext?]

Mine worked intermittently since new. Dealer said battery low and needs charging - 2 or 3 times and no fault found. After 3rd time time, I insisted a proper diagnostic - surprise surprise battery faulty and they tried blaming the Dashcam causing a severe battery drain (but never had any problems with the car not starting or even a notifications to suggest battery is low)

Since the battery was replaced, has worked consistently

[kevwalker245]

I have a 59 plate C30 (1.6 edrive), and the edrive (start stop) function is no longer working.
I have replaced the start/stop battery as that was my first thought and ensured that both batteries (start/stop & main) are fully charged, and yet the start stop function still doesn’t work.

I then explored the functionality of the edrive system by rolling to a stop, with edrive selected and with the car in gear, I deliberately stalled the car by lifting the clutch with the car still in gear and brakes applied. As the car stalls the dashboard tells me that depress the clutch to start. When I depress the clutch the care does start as it's supposed to.

Similarly if I roll to a stop, with edrive selected and with the car in gear, and again I deliberately stalled the car by lifting the clutch with the car still in gear and brakes applied. As the car stalls I then move the car out of gear and release the clutch the dashboard tells me that depress the clutch to start – hence this now represents the conditions for auto stop/start and when you depress the clutch the car starts.

Hence I believe the system would work if I could establish what sensor is used to detect the car has come to rest as this must be faulty as the car will not cut out automatically when operated normally.

Anyone got any ideas