General: Instrument Cluster Interchangeability

[Microwyse]

Hi Guys.
I have a 2014 V60 D4 Business. With a standard Instrument Cluster not digital. The Rev counter range is next to useless. I want to change it to the R Design digital cluster which I believe gives the option in sport mode to show the revs in the main center part and would be way more detailed.

My Questions are :
1. Would any of the the R Design clusters from V40 and V60 physically fit ?
2. Would I be able to able to switch between the different modes. How is that done ?

I know this may sound trivial but it bugs the hell out of me not knowing what revs I'm at.

Thanks

[S60RDesign]

I’ve seen a video on YouTube where someone changed the cluster in their V70, some Russian guy I think. More trouble than it’s worth I would think though

[savabill]

Do a search on YouTube for VOLVOSWEDEN. He has done it on his T6 v70xc. You do lose some functions, you need Vida to set the correct time.

[RS3100]

VDash can do it. I installed a TFT cluster in my 2017MY V40 with analogue cluster using VDash.

There's a lot of information here. It's worth reading it all the way through. Exactly what you need to do depends on the age of your car.

https://forums.swedespeed.com/showth...-2011-2013-S60

Alternatively you can have it installed by a Volvo dealer. The cost was near £900 when I looked a couple of years ago, but I think Volvocars London were advertising supply and fitting a new cluster for £399 a few months ago.

[Microwyse]

Thanks for all the info. If I go ahead and try the swap I will document the process and post for others.

Much appreciated.

[Clan]

Originally Posted by Microwyse

Hi Guys.
I have a 2014 V60 D4 Business. With a standard Instrument Cluster not digital. The Rev counter range is next to useless. I want to change it to the R Design digital cluster which I believe gives the option in sport mode to show the revs in the main center part and would be way more detailed.

My Questions are :
1. Would any of the the R Design clusters from V40 and V60 physically fit ?
2. Would I be able to able to switch between the different modes. How is that done ?

I know this may sound trivial but it bugs the hell out of me not knowing what revs I'm at.

Thanks

Here is the proper way to do it , at least you wont have any problems and every function will work .

https://accessories.volvocars.com/en...CC-499515/2014