!990 gl B200F - Page 3

Antz · Dec 18th, 2017, 21:42

Quote:

Originally Posted by timetrip

Yes ant that's the one and i will have it cheers.....my email is garfield78@hotmail.co,uk presume you will send a payment request to me via that..regards Adrian...

Paypal request sent. Let me know if you have any problems.

Bob Meadows · Dec 18th, 2017, 21:59

Hi: ~ It would also be worthwhile removing the driver’s door lock switch i.e. the one that is wrapped around the door lock barrel, it can be removed from the inside by pulling the tag over them work the same out of the door (this is attached to the part you refer to) the battery going flat is probably due to the wires being frayed due to flexing- the part can be opened up carefully but watch out for the small spring that fits under the sliding mechanism. Once cleaned up you can sleeve the wires with heat shrink and surround the same with Polyurethane Sealer/adhesive to aid the flexing, the wires will have to be cut to fix the new part i.e. the pull/push switch. Just completed this on my car.
Good Luck
Bob

timetrip · Dec 19th, 2017, 18:35

YES BOB, I HAVE JUST FINISHED REWIRING THE SWITCH ETC AND REPLCING ON CAR IN THE MORNING ALTHOUGH I HAVE TO CLEAN THE POWER PLUG FIRST,,i DID TEST IT AND ALL IS WORKING..SO CHEERS ANYWAY...

timetrip · Dec 19th, 2017, 18:36

Quote:

Originally Posted by antz

paypal request sent. Let me know if you have any problems.

payment sent ant thanks again...

Antz · Dec 19th, 2017, 23:12

Quote:

Originally Posted by timetrip

payment sent ant thanks again...

Be sent on Thursday morning buddy. Any problems let me know.

timetrip · Dec 29th, 2017, 17:40

Hi Ant ,, well ift finally arrived today the 29th and is the right part..and in better condition than the one i have now rewired...so thanks again and a happy new year to you...... regards Adrian.

Antz · Dec 30th, 2017, 16:44

Quote:

Originally Posted by timetrip

Hi Ant ,, well ift finally arrived today the 29th and is the right part..and in better condition than the one i have now rewired...so thanks again and a happy new year to you...... regards Adrian.

It took a while to arrive. Very odd. It was sent the day I said. Sorry for the late delay, I assume Christmas delayed things.

Dec 18th, 2017, 21:59	#22
Bob Meadows Premier Member Last Online: Yesterday 20:17 Join Date: Sep 2017 Location: STANDISH LANCASHIRE	Central Locking Switch Hi: ~ It would also be worthwhile removing the driver’s door lock switch i.e. the one that is wrapped around the door lock barrel, it can be removed from the inside by pulling the tag over them work the same out of the door (this is attached to the part you refer to) the battery going flat is probably due to the wires being frayed due to flexing- the part can be opened up carefully but watch out for the small spring that fits under the sliding mechanism. Once cleaned up you can sleeve the wires with heat shrink and surround the same with Polyurethane Sealer/adhesive to aid the flexing, the wires will have to be cut to fix the new part i.e. the pull/push switch. Just completed this on my car. Good Luck Bob

Dec 19th, 2017, 18:35	#23
timetrip Not a junior anymore Last Online: Apr 15th, 2024 19:03 Join Date: Nov 2014 Location: Worcester/Droitwich	YES BOB, I HAVE JUST FINISHED REWIRING THE SWITCH ETC AND REPLCING ON CAR IN THE MORNING ALTHOUGH I HAVE TO CLEAN THE POWER PLUG FIRST,,i DID TEST IT AND ALL IS WORKING..SO CHEERS ANYWAY...

Dec 29th, 2017, 17:40	#26
timetrip Not a junior anymore Last Online: Apr 15th, 2024 19:03 Join Date: Nov 2014 Location: Worcester/Droitwich	Hi Ant ,, well ift finally arrived today the 29th and is the right part..and in better condition than the one i have now rewired...so thanks again and a happy new year to you...... regards Adrian.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)