|
Performance Volvo Cars A forum for those interested in any Volvo performance car from any era, FWD, RWD and AWD! |
Information |
|
fitting big brakes ? read this first!!Views : 2420 Replies : 18Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 3rd, 2009, 11:24 | #1 |
Junior Member
Last Online: Jan 21st, 2010 22:04
Join Date: Jul 2009
Location: wakfield
|
fitting big brakes ? read this first!!
I've owned various preformance cars over the years from a TVR to a 360bhp Nissan track car and lots in between (infact I still have the TVR, I haven't been able to bring myself to sell it even though I could use the money and with 2 small kids it rarely gets used)anyway I've now bought a Volvo 850R to lug the kids about, but me being me I can't just leave it alone so naturally I check out what everyone is doing, and cwhen I come to brakes all I see is talk of big brake kits (Porsche brakes on a volvo!!!) it's the same on every forum people seem to think by putting the biggest front brakes possible on a car it will improve it's stopping ability, anyone seriously thinking about this course of action should read this first:
http://www.mgf.ultimatemg.com/group2...ake_myth_1.htm I know the artical talks about MGF racers but the math is the same no matter what car you drive. Getting good brakes is all about balance plus the condition of the system seems to me the best Volvo 850 option is 302 discs and S70/C70 caliper bracket with a suitable pad (dependent on intended driving situation), with new fluid, braided hoses and everything free, clean, lubed and in tip top condition this set up should prove a big improvement over stock while retaining it's overall balance. |
The Following User Says Thank You to budd For This Useful Post: |
Aug 3rd, 2009, 12:25 | #2 |
Master Member
Last Online: May 11th, 2017 15:36
Join Date: Jan 2009
Location: Where the.....
|
Most of us are more than aware that there is no increase in braking force/friction due to the nature of how brakes work, unless the servo is altered to allow greater pressure on the brake piston.
The major reason why most people opt for the bigger brake kit is to reduce fade issues, which is a known problem with running the T5 cars on track owing to the weight of them. The larger surface area of the components within the BBK means it takes longer for the heat to build up in the first place, and also allows for faster cooling of the disc/pad surface area. With regards to the best option from Volvo themselves, there was actually a factory option of a 320mm brake setup on the Phase 1 cars. |
Aug 3rd, 2009, 21:27 | #3 | |
Forum Support Team
Last Online: Nov 28th, 2022 17:33
Join Date: Jan 2009
Location: Here.... obviously!
|
id have to disagree with that.
1st: a larger diameter disc will have more braking power, it works simply like a lever. next time you are taking your wheels off, try putting force on the wrench right next to the nut, at the end of the wrench and then with a breakers bar. you will notice you need progressively less effort the further away you are. 2nd: Quote:
But going with his theory, does this mean that there is no point in putting high end premium tyres on your car, as no matter what rubber you have, the EBD dictates when your wheels are slipping based on a fixed measurement. Your tyres could be performing well and well within their grip levels but the abs decides your stopping to fast and reduces the braking pressure. I think this part of his theory is flawed, surely it is a difference in wheel speeds that activites EBD and not a pre-determined braking force/speed. Personally i think the problem with bigger brakes is not the size of the disc but the amount/size of the pistons in the calipers in relation to the original amount/size of pistons and the brake master cylinder. If your normal brake set up is a 1 piston set up, then your brake is on a 1:1 ratio, fitting a caliper with two pistons the same size as the original piston, then puts you on a 1:2 ratio, meaning you have to put twice as much fluid into the system to get the same pressure. if you have a 4 piston caliper, all 4 pistons the same size as original piston, then you are on a 1:4 ratio, meaning you have to put four times as much fluid into the system to get the same pressure. your problem would then be that you would hit the floor on your brake peddle without ever getting any substantial force on the disc and resulting in a longer braking distance. Last edited by tt82; Aug 3rd, 2009 at 22:09. Reason: added more info |
|
Aug 3rd, 2009, 22:19 | #4 |
Premier Member
Last Online: Feb 15th, 2022 07:50
Join Date: Dec 2001
Location: Back home in 'Norn Iron'
|
I hope most of us are more than aware that increasing the diametre of the disc will increase the braking torque and that increasing the coefficient of friction of the pads will also increase braking torque!
__________________
Simon J |
Aug 3rd, 2009, 22:28 | #5 | |
Premier Member
Last Online: Feb 15th, 2022 07:50
Join Date: Dec 2001
Location: Back home in 'Norn Iron'
|
Quote:
And who would be crazy enough to think of putting four pistons the same size as the single one in a caliper? That would give you twice the clamping force (not four times) which would totally upset your brake balance. Bigger brakes in the sense of bigger disc diametre, make sense (more or less) but just putting bigger calipers and pistons on is madness. Even the 320mm brakes that Volvo offered use exactly the same piston size as the standard calipers thus maintaining the brake balance for the ABS.
__________________
Simon J |
|
Aug 4th, 2009, 08:03 | #6 | |
Forum Support Team
Last Online: Nov 28th, 2022 17:33
Join Date: Jan 2009
Location: Here.... obviously!
|
Quote:
as for the sizes, im talking about off the shelf aftermarket alternatives, it was just for example to make it easier to explain, in reality a small difference in caliper sizes can have adverse effects on your braking system. |
|
Sep 2nd, 2009, 21:26 | #7 |
Master Member
Last Online: Dec 1st, 2010 23:19
Join Date: Jan 2008
Location: darlington
|
The braking system will only hold so much fluid and only create a maximum amount of pressure. The reason bigger calipers with more pistons in works is because they even the pressure over the entirity of the pad, allowing for maximum pressure to be excerted right across the braking surface. Bigger discs and pads creat a greater amounts of friction which is what braking is, momentum turned into heat. Meaning bigger discs (to a certain extent) are better. If i'm wrong i suggest you contact every racing team in the world and tell them to stop buying expensive big brakes as cheap small ones will do.
However big discs on the back should be a no no unless the fronts have more bite and are bigger as it will cause the car to swap ends under heavy breaking |
Sep 8th, 2009, 18:39 | #8 | |
Premier Member
Last Online: Feb 15th, 2022 07:50
Join Date: Dec 2001
Location: Back home in 'Norn Iron'
|
Quote:
__________________
Simon J |
|
Sep 8th, 2009, 22:00 | #9 | |
Master Member
Last Online: Dec 1st, 2010 23:19
Join Date: Jan 2008
Location: darlington
|
Quote:
By the way i'll send the link to Brembo, AP, TMD etc and tell them to shut up shop, and take the day off. I was taught music because it was on the curriculum but it didn't help in my choice of stereo. Some people need to calm down a little me thinks. The original concern was about brake balance, which incidently is adjustable from corner to corner on a track and if your being picky, on the road if your driving hard. The reason manufacturers put the brakes on they do is because they are balanced for that car under all possible driving conditions. People who put big brakes on are adjusting the conditions and are adjusting their braking to suit, i'm sure someone who managed to get a few hundred horsepower more from their car and crashed it cos they left small brakes on will appreciate your physics lesson. Until then take life a little less seriously. |
|
Sep 9th, 2009, 21:00 | #10 | |
Premier Member
Last Online: Feb 15th, 2022 07:50
Join Date: Dec 2001
Location: Back home in 'Norn Iron'
|
Quote:
But I think you'd better read the article first. You wouldn't want them to think you didn't know what you were talking about in your covering email, would you?
__________________
Simon J |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|