|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
2.4D MAF sensor code ECM-P010117Views : 1668 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 27th, 2018, 14:07 | #1 |
Junior Member
Last Online: Mar 4th, 2023 22:33
Join Date: Mar 2015
Location: Somewhere
|
2.4D MAF sensor code ECM-P010117
Hi all,
Got the following code from my MAF sensor, I've tried clearing it and it comes back within about 50 miles or so. The car doesn't feel as powerful as I imagine a 2.4D should either. It doesn't seem to be reading ludicrously high values. (13g/s when the engine is off) but the error code states Circuit Voltage Above Threshold What's my best next step for getting it sorted? Is it worth disassembling to see if there's any gunge stuck in it? |
Dec 13th, 2018, 22:03 | #2 |
New Member
Last Online: Dec 18th, 2019 13:11
Join Date: May 2018
Location: Wrexham
|
Hi. Have You managed to sort this out? I have the same fault.
|
Dec 13th, 2018, 22:19 | #3 |
Junior Member
Last Online: Mar 4th, 2023 22:33
Join Date: Mar 2015
Location: Somewhere
|
I think it may have been related to the EGR. I replaced the MAF and a few weeks later started getting a fault code related to the EGR.
It turns out the black sensor box at the front of the EGR just needed a clean. The error I was getting was something along the lines of 'implausible signal' |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|