|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
weird crank no startViews : 275 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 13th, 2024, 19:41 | #1 |
New Member
Last Online: Yesterday 23:22
Join Date: Jan 2024
Location: Belfast
|
weird crank no start
2003 V70 D5 163 215k miles
Yesterday after a 30 min drive coming in to park I got a random light on that passenger rear door was open. Didn't think much of it, parked up turned car off and opened then closed the door (no problem) Came back to her about 30 mins later, key in, ignition on and nothing lights up. car would crank but no start. Key out, back in and only the radio lit up but yet again crank no start. I disconnected the battery for 20 mins and back up she fired although now with an SRS service required message. Anyone any idea what this might have been, it's the second time it has happened in the past 6 months and I don't want it to happen somewhere inconvenient? I haven't had any previous electrical problems with the car. |
Apr 13th, 2024, 20:26 | #2 |
Premier Member
Last Online: Yesterday 22:30
Join Date: Mar 2017
Location: Manchester
|
you need to get the car scanned with vida these events will have left a marker which will point you to where the fault lies. whats the battery condition like?
|
Apr 13th, 2024, 20:49 | #3 |
New Member
Last Online: Yesterday 23:22
Join Date: Jan 2024
Location: Belfast
|
Battery is in good condition, replaced within the last 10 months. I'll plug it into VIDA tomorrow and post the results. Car has started fine multiple times today, hopefully VIDA points me in the right direction
|
Apr 16th, 2024, 17:28 | #4 |
New Member
Last Online: Yesterday 23:22
Join Date: Jan 2024
Location: Belfast
|
Got her plugged into VIDA yesterday here are the codes
ECM-E003 Configuration fault - Faulty configuration AUM-E003 Configuration faut Faulty configuration BCM-E003 Configuration fault Faulty configuration DIM-E003 Configuration faut Faulty configuration PSM-E003 Configuration fault Faulty configuration SAS-E003 Configuration faut Faulty configuration SRS-E003 Configuration fault Faulty configuration Could this be main relay? If so does anyone know how I can test it wont happen again after replacing? |
Apr 16th, 2024, 17:29 | #5 |
New Member
Last Online: Yesterday 23:22
Join Date: Jan 2024
Location: Belfast
|
Should also mention all codes cleared fine and havent reappeared, thats not to say it wont randomly happen again
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|