V50 Engine 2.0D : - Sump to block and Cylinder head cover sealant

Tannaton · Oct 21st, 2015, 17:28

I'm rebuilding a 2.0D engine from a V50 (D4204T - DW10 BTED4 in PSA speak). According to the Haynes manual there is a Volvo specific sealant used for the joints between the sump and block etc. However from the dealer it is £39.50 +VAT!!

I want to do a proper job but would rather avoid that cost - does anyone know a suitable equivalent? The dealer was helpful and suggested that Volvo use only Wurth products for sealants.

Any suggestions appreciated...

alfadave11 · Oct 21st, 2015, 21:44

call your local engine builders and some .....they will advise you on what works and what doesn't

Oct 21st, 2015, 17:28	#1
Tannaton Bungling Amateur Last Online: Today 00:15 Join Date: Aug 2014 Location: Beverley, East Yorks	Sump to block and Cylinder head cover sealant I'm rebuilding a 2.0D engine from a V50 (D4204T - DW10 BTED4 in PSA speak). According to the Haynes manual there is a Volvo specific sealant used for the joints between the sump and block etc. However from the dealer it is £39.50 +VAT!! I want to do a proper job but would rather avoid that cost - does anyone know a suitable equivalent? The dealer was helpful and suggested that Volvo use only Wurth products for sealants. Any suggestions appreciated... __________________ 2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135

Oct 21st, 2015, 21:44	#2
alfadave11 Senior Member Last Online: Jan 21st, 2016 19:35 Join Date: Sep 2015 Location: wirral	call your local engine builders and some .....they will advise you on what works and what doesn't

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)