|
400 Series General Forum for the Volvo 440, 460 and 480 cars |
Information |
|
440se won't startViews : 576 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 4th, 2006, 14:06 | #1 |
Guest
Location:
|
440se won't start
Just drove home and parked, then it wouldn't start again. Have power to the solonoid but not to the trigger.
Suspect the immobiliser, it's a MSI 4031, but as the vehicle was purchased second hand there is no paperwork on this unit. If anyone has any knowledge of this immobiliser or a wiring diagram it would be most helpful, if only to remove the unit and install a newer version. Failing that it looks like it will be a matter of identifying and reconnecting all the interrupted wiring. Have searched the web for info on MSI but with no luck. Any suggestions or info would be greatfully received. cheers |
Nov 5th, 2006, 18:35 | #2 |
Junior Member
Last Online: Oct 18th, 2014 18:02
Join Date: Apr 2006
Location: Aylesbury
|
It won't be as bad as you think to do away with it. In my job as a technician I regularly do away with knackared aftermarket immobilisers. Just trace the wires from it to their source and there will most likely be some piggy backing wiring that can just be cut off and a couple of wires bypassed, just remove these and reconnect original wiring.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|