|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Xc90 2.4 d5 failing to start but cranksViews : 2783 Replies : 18Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Oct 21st, 2020, 06:55 | #1 |
New Member
Last Online: Feb 8th, 2021 18:42
Join Date: Oct 2020
Location: bridlington
|
Xc90 2.4 d5 failing to start but cranks
So my xc90 is failing to start, it stated when I broke down the aa came out and said that the high pressure fuel pump was knackered so replaced with a second hand one that was tested its 185bhp
The issue is its got all these errors and I have replaced a lot of sensors with no avail any help would be amazing I tested with multiple diagnostic software Vida and launch |
Oct 21st, 2020, 07:39 | #2 |
Premier Member
Last Online: Apr 25th, 2024 19:56
Join Date: Feb 2012
Location: Preston
|
It’s looking like a fuel pressure problem there. What codes did Vida report, they’ll be more specific.
I’d be tempted to look at the fuel filter first and with that off check to see if the low pressure pump is working. |
Oct 23rd, 2020, 06:30 | #3 | |
New Member
Last Online: Oct 26th, 2020 08:03
Join Date: Oct 2020
Location: Nairobi
|
Quote:
|
|
Oct 23rd, 2020, 12:12 | #4 |
New Member
Last Online: Jan 16th, 2021 10:55
Join Date: Oct 2020
Location: West midlands
|
Any update on this? I have a similar problem... started fine before I changed fuel pump and swirl flaps but now won’t start?
Any suggestions Thanks Tyler |
Oct 23rd, 2020, 19:21 | #5 |
Junior Member
Last Online: Yesterday 17:13
Join Date: Dec 2019
Location: City of the Metropolitan Elite
|
When you replace the fuel pump don't you typically need to bleed the air or turn on fuel pump via key (but not crank the car- that humming sound I hear from the car for a brief moment just before I crank the engine I think is the fuel pump pressurising/working) so that fuel is making it past the fuel pump and into the fuel rails?
Last edited by Fika; Oct 23rd, 2020 at 19:24. |
Oct 24th, 2020, 13:17 | #6 |
New Member
Last Online: Jan 16th, 2021 10:55
Join Date: Oct 2020
Location: West midlands
|
I have had the car tested via diagnostic laptop, showing full pressure to the rail, no error codes coming through at all the thing just won’t start!
Close to being done with it now if I don’t find a solution soon lol |
Oct 24th, 2020, 18:59 | #7 |
Premier Member
Last Online: Apr 25th, 2024 19:56
Join Date: Feb 2012
Location: Preston
|
Blow a bit of easystart up the air intake, if it fires on that (it will sound horrible), you’re looking at a fuel system problem. If not, it’s intake related.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|