|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Front vacuum engine mountingViews : 1130 Replies : 10Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Aug 3rd, 2022, 23:20 | #1 |
Junior Member
Last Online: Mar 17th, 2023 10:22
Join Date: Feb 2022
Location: Wirral
|
Front vacuum engine mounting
S80 D5 front vacuum engine mounting, trying to change it took the nut off the top and the bolt from the bottom, put jack under engine but it did not budge it just jacks the car up at all what am I missing?
Last edited by Rex7; Aug 3rd, 2022 at 23:34. |
Aug 4th, 2022, 00:13 | #2 |
Premier Member
Last Online: Today 14:19
Join Date: Apr 2011
Location: Belfast
|
You need to take the two bolts out of the engine mount under the crank pulley and the two bolts from the gearbox torque mount as well
__________________
1996 850 T5 - Sold 2003 S40 1.9d - Sold 2004 S60 D5 |
Aug 4th, 2022, 07:15 | #3 |
Junior Member
Last Online: Mar 17th, 2023 10:22
Join Date: Feb 2022
Location: Wirral
|
Cheers Dan, I had taken the gearbox one of by the front cross member where the mounting is , do I need to take the left hand side Wheel off or can we get it from underneath the car ?
|
Aug 4th, 2022, 09:26 | #4 |
Spannering since birth
Last Online: Jun 14th, 2024 21:05
Join Date: Jul 2006
Location: North Oxon
|
Also you might need to loosen the brace across the top of the engine before jacking the engine - just take off the 2 bolts both sides by the strut-top mounting.
__________________
V70 D5 eu4 manual M66 2006 > XC90 brake conversion, stage 2 VDASH remap. BMW R1200GS BMW R1100GS (GS Addict) |
The Following User Says Thank You to john493 For This Useful Post: |
Aug 4th, 2022, 10:38 | #5 |
Junior Member
Last Online: Mar 17th, 2023 10:22
Join Date: Feb 2022
Location: Wirral
|
|
Aug 4th, 2022, 23:12 | #6 |
Junior Member
Last Online: Mar 17th, 2023 10:22
Join Date: Feb 2022
Location: Wirral
|
To Dan and John thank you for your advice, I found it easy after I took the weight off it and removed the engine mounting bracket, only 3 bolts came off in minutes because I could not get the clearance I wanted to remove the vacuum mounting, it was easy after that
|
The Following User Says Thank You to Rex7 For This Useful Post: |
Aug 5th, 2022, 01:50 | #7 |
Master Member
Last Online: Yesterday 21:52
Join Date: Sep 2008
Location: Nottingham
|
I have to do this job soon on my XC70... so quite glad I read this thread!
New discs and pads this weekend first though. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|