|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
ECU or fuel injectors? s40 v50 2.0 dieselViews : 1864 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 3rd, 2014, 22:33 | #1 |
New Member
Last Online: Oct 6th, 2014 18:17
Join Date: Jul 2014
Location: Yorkshire
|
ECU or fuel injectors? s40 v50 2.0 diesel
Hi people, once again, got ECU checked by repair company for my s40 v50 diesel 2.0 who said it is fine no errors. put back into car along with a new injector and now no pulse signal to injector 1 and 4 (4 being the one that was said to be faulty and replaced), injectors 2 and 3 according to mechanic are getting a signal but not 1 and 4. he has checked the wiring from the ECU harness for continuity using the ohmeter they are fine however using noid lamps there is no signal to injector 1 and 4. the car does start but after a serious struggle. however serious misfire due to 1 and 4 being down.
so mechanic reckons it is a faulty ECU and advised it should be replaced, but it is very expensive to do. he is adamant it cannot be a fault with any other component. any thoughts on this one, I was advised on this forum it could be throttle body needs cleaning or changing fuel filter, but mechanic is saying the electrical issue is not controlled by these components . this car is seriously stressing me out....please any advise will be greatly appreciated. why would pulse go only to 2 injectors and not the other 2? Thanks in advances |
Aug 3rd, 2014, 23:57 | #2 |
Senior Member
Last Online: Mar 29th, 2019 01:52
Join Date: Dec 2012
Location: Martock , Somerset TA12 6HB
|
Ecu or injectors
You need for certain to be able to check continuity of wiring from Ecu to injectors, do not buy an Ecu until you can prove that it is faulty, if your mechanic cannot sort it get an auto electrician to test it, either that or waste more money on parts that may not be needed, it is quite rare that ecus are faulty, it is normally wiring connections or bad earths etc...
|
Aug 4th, 2014, 09:50 | #3 |
New Member
Last Online: Oct 6th, 2014 18:17
Join Date: Jul 2014
Location: Yorkshire
|
the two injectors which are working the noid lamp is indicating that to be the case, whereas the 2 which are not working the lamp is not lighting. why would 2 injectors not have signal and 2 do, is there a separate controller for each injector on the ecu?
|
Feb 16th, 2018, 19:00 | #4 |
New Member
Last Online: May 24th, 2023 19:49
Join Date: Feb 2018
Location: Blackpool
|
Follow up
Did you get to the bottom of the problem as I am having the same problem with my v50. I know it was a long time ago but any help would be appreciated.
|
Feb 17th, 2018, 20:22 | #5 |
Premier Member
Last Online: Feb 4th, 2023 15:10
Join Date: Apr 2015
Location: uk
|
can i ask lookingat ecu unit is it covered in white fluff corrosion if so replace ecu
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|