|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
DPF Parameter Vida V50 DPF pressure sensorViews : 580 Replies : 7Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Aug 3rd, 2021, 20:10 | #1 |
New Member
Last Online: Sep 13th, 2021 12:50
Join Date: Feb 2021
Location: Knottingley
|
DPF Parameter Vida V50 DPF pressure sensor
Hi all in Vida 2013 does anyone know which tab i need for the DPF parameters, getting signal too high on the pressure sensor and wanted to check the values i have on a garage test report.
Last edited by Spikermundo; Aug 3rd, 2021 at 20:22. |
Aug 8th, 2021, 22:44 | #2 |
Premier Member
Last Online: Yesterday 23:31
Join Date: Mar 2017
Location: Manchester
|
ecm engine control module. there is a you tube vid on forced regen which shows vida screen shot to use
Last edited by Simmy; Aug 8th, 2021 at 22:50. Reason: more info |
Aug 9th, 2021, 20:55 | #3 |
New Member
Last Online: Sep 13th, 2021 12:50
Join Date: Feb 2021
Location: Knottingley
|
Thanks for the reply got past that part but now stuck on replacement of particulate filter pressure sensor registering a new part seen a screenshot but not sure where it is in Vida
|
Aug 10th, 2021, 00:04 | #4 |
Premier Member
Last Online: Yesterday 23:31
Join Date: Mar 2017
Location: Manchester
|
scroll upto the xc90 section some one has posted this info today with a full descrption of the adaptation its same for v50
|
Aug 10th, 2021, 19:22 | #5 |
New Member
Last Online: Sep 13th, 2021 12:50
Join Date: Feb 2021
Location: Knottingley
|
Hi yes that was me asking where it was in Vida but I don't seem to have the adaptation part
|
Aug 10th, 2021, 21:22 | #6 |
Premier Member
Last Online: Yesterday 23:31
Join Date: Mar 2017
Location: Manchester
|
make shure to scroll to th bottom of vida screens sometimes info is hidden at the bottom of the page also check for breaks in the pressure sensor wire near the connecting plug
|
Aug 11th, 2021, 16:59 | #7 |
New Member
Last Online: Sep 13th, 2021 12:50
Join Date: Feb 2021
Location: Knottingley
|
Plugged my wife's V40 2.0 to vida and the adaptation of sensor instruction is there but no instruction for the D4146T just take out and put back in reverse order so assume it does not need it. Checked the wires as the DPF thermostat wire had broken at the connection which i think caused DPF to burn out was advised it will have holes in the honeycomb. Good advice scrolling down as previous searches were down the screen and not obvious, much more information available than i thought.
|
Aug 11th, 2021, 17:08 | #8 |
Premier Member
Last Online: Yesterday 23:31
Join Date: Mar 2017
Location: Manchester
|
dpf sensor may re configure its self but it may take several journeys before this happens delete all prievious codes and work from there.
Last edited by Simmy; Aug 11th, 2021 at 17:09. Reason: dumb ass spelling |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|