fitting kit and blanking plate

Sep 28th, 2006, 13:56

does anyone know where i can get a fitting kit including blanking plate for a dump valve? all companys ive contacted will only do the fitting kit with the dump valve. ive already got the turbo xs H-RFL. its for an s70 t5

Dan850R · Sep 28th, 2006, 17:56

ive just bought a silicone hose with a 25mm take off on it , (54mm diameter)for £23, you only need 2 large clips and 1 small clip, and made a blanking plate my self by taking off the recirc valve and making a pattern out off alloy, cutting it out and drilled the holes, make sure you have a good gasket around it outerwise it will leak.

or you can buy a fitting kit from pretty much any where for around £35 but you still need a blank.

http://www.demon-tweeks.co.uk/produc...=BAIFK80&app=Y

smartbomb · Sep 29th, 2006, 17:22

I believe Don from Kalmar Union will be able to get one of these.

Paul

Sep 29th, 2006, 21:15

This one I am sure would fit any mitsubishi turbo fitted to volvos:

http://www.partsforvolvosonline.com/...oducts_id=4505

However for some unknown reason, although it must just be a cheapo bit of metal it seems to cost a rip-off £20!

Pete

Sep 28th, 2006, 13:56	#1
alkis777 Guest Location:	fitting kit and blanking plate does anyone know where i can get a fitting kit including blanking plate for a dump valve? all companys ive contacted will only do the fitting kit with the dump valve. ive already got the turbo xs H-RFL. its for an s70 t5

Sep 28th, 2006, 17:56	#2
Dan850R Junior Member Last Online: Aug 6th, 2019 22:26 Join Date: Feb 2006 Location: Oswestry View Photos By: Dan850R	ive just bought a silicone hose with a 25mm take off on it , (54mm diameter)for £23, you only need 2 large clips and 1 small clip, and made a blanking plate my self by taking off the recirc valve and making a pattern out off alloy, cutting it out and drilled the holes, make sure you have a good gasket around it outerwise it will leak. or you can buy a fitting kit from pretty much any where for around £35 but you still need a blank. http://www.demon-tweeks.co.uk/produc...=BAIFK80&app=Y

Sep 29th, 2006, 17:22	#3
smartbomb VOC Member Last Online: May 4th, 2011 11:56 Join Date: Dec 2004 Location: Mansfield	I believe Don from Kalmar Union will be able to get one of these. Paul

Sep 29th, 2006, 21:15	#4
peteS40 Guest Location:	This one I am sure would fit any mitsubishi turbo fitted to volvos: http://www.partsforvolvosonline.com/...oducts_id=4505 However for some unknown reason, although it must just be a cheapo bit of metal it seems to cost a rip-off £20! Pete

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)