|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
Information |
|
2.5D type D5252T turbo diesel V70Views : 18504 Replies : 43Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Sep 23rd, 2007, 23:21 | #1 |
New Member
Last Online: Aug 30th, 2021 17:52
Join Date: Sep 2007
Location: Dinas Powys, Vale of Glamorgan
|
2.5D type D5252T turbo diesel V70
Does anyone have knowledge of the appropriate fault code reader/scanner which will work correctly with a 2001 model year (registered Sept. 2000) V70 2.5 D with type D5252T Audi/VW engine? There are plenty of adverts out there but it would appear that none I`ve seen will be compatible with my model as it`s pre 2003/4 when diesel OBD2 became law. The car is fitted with a marked `OBD11` 16 pin connector socket but I`m now thinking that Volvo must have wired it to their own specific needs and not to one of the existing OBD 2 protocols- I recently tried some new readers from Gendan and they would not work with my car although they were compatible with OBD2, EOBD, ISO, KWP2000,PWM,VPW and CAN protocols. If there is nothing out there (except the Main or independant Dealer test equipment) that will read my vehicle, does anyone know of any DIY methods that will work? I`ve tried the paperclip-and-count-the-light-flashes method but this didn`t work either! Lastly, the OBD 2 socket has the following pins populated - (Top Row- 3,4,5,6,7. Bottom Row- 11,14,16. Food for thought!! Thanks a lot KenV70
|
Sep 24th, 2007, 10:01 | #2 | |
Phoenix from the ashes
Last Online: Apr 24th, 2024 01:05
Join Date: Jan 2006
Location: Finchingfield
|
Quote:
cheers jod
__________________
Dum Spiro Spero VOC 20419 |
|
Sep 24th, 2007, 18:48 | #3 | |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
Quote:
you will not be able to get a code reader from the internet, e bay or any of the above that will work with your car. your engine manegement system is msa 15.8 so unless you no a auto elec who has the code reader to read msa 15.8, it will be a main dealer or an indi. hope that helps . mike 850 tdi p box |
|
Sep 26th, 2007, 21:54 | #4 |
New Member
Last Online: Aug 30th, 2021 17:52
Join Date: Sep 2007
Location: Dinas Powys, Vale of Glamorgan
|
2.5D type D5252T turbo diesel V70
Hi Mike and thanks for your reply to my enquiry. Please excuse my ignorance but could you confirm exactly what MSA 15.8 is? (I`m assuming it may be the type of computer softwear which has been installed by Volvo) I know that my local independant Volvo repairer uses both a laptop and/or a handheld unit when reading my vehicle`s diagnostic socket. I couldn`t see what make his handheld unit was, but he reckoned it cost about £400 which is way over what I had in mind when looking to buy my own reader! Again, thanks for your time, Ken.
|
Sep 27th, 2007, 17:40 | #5 |
VOC Member
Last Online: Apr 10th, 2017 16:55
Join Date: Jan 1970
Location: South Kent Coast
|
As you have PM'd me re. this I thought it best ro answer here:
As has been said the engine management system in your car will be Bosch MSA 15.8. I'm afraid I know of no equipment, within the budget you mentioned above, that will communicate with this unit. |
Nov 17th, 2007, 01:02 | #6 |
New Member
Last Online: Feb 14th, 2009 00:12
Join Date: Nov 2007
Location: stoke-on -trent
|
code reader
hi everyone would the sykes picitant code reader work with volvo pods seen them on ebay and are becoming cheap im rattling my brains myself about the readers so far brought three but dont work with my 2.5 tdi 1997
|
Nov 17th, 2007, 08:10 | #7 | |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
Quote:
i have a code reader for your car, i have pm you mike 850 tdi |
|
Sep 26th, 2008, 21:15 | #8 | |
Junior Member
Last Online: Apr 30th, 2018 13:42
Join Date: Nov 2007
Location: Carmarthen
|
Quote:
I can supply you with one or you can use mine for free if you live nearby(West wales). Loz |
|
May 20th, 2010, 01:03 | #9 |
Dan
Last Online: Feb 11th, 2024 00:27
Join Date: Apr 2010
Location: Newcastle upon Tyne
|
Very curious to see what will read 15.8, I've got the lead and a USB to serial converter lead, but FCR1.3 is just giving interface errors on the port, as is scantool & EasyOBDII
|
May 20th, 2010, 09:47 | #10 |
Senior Member
Last Online: May 30th, 2024 09:37
Join Date: Apr 2007
Location: Andover
|
I have the BSR PPC which I've used on my S80s but it will not work on my daughter's 1999 V70 tdi which is MSA 15.8. Nor will Vol FCR which I use on my 1998 V70 tdi.
__________________
2013 S60 D5 Lux Nav Auto 2016 V70 SE Lux D4 Auto 33k |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|