Quote:
Originally Posted by Tannaton
No. 4 sensor is the far one on the drivers side (on a UK car).
It is possible to change the sensor without removing the bumper if you drive the sensor into the bumper with a drift which will enable you to remove the collar and then the old sensors with long nose pliers, you can then fit the new sensor to the collar and re-install.
That's not the prescribed method and there is a small risk of damage but I've done it successfully 10+ times and it saves hours....
|
So, tap the sensor into the bumper, fish the collar out of the bumper then fish the sensor back out the hole? Does this break the coller? I've got one to change this week, would like to try this way.