Changing air conditioning compressor belt for S80 2008

Niedermeier · Jan 23rd, 2019, 18:19

Hello,
How i can change air conditioning compressor serpentine belt for volvo s80 2.4 diesel without special tool? I have dayco belt 5PK628EE, but when i try change belt that is incredibly tight.

Ovlovppz · Jan 23rd, 2019, 19:49

They are incredibly tight.
Put the belt over the top pulley
Start it on the bottom pulley as tight as you can
Put some smooth card or a credit card between the pulley and the belt to help it sliden on.
Turn the pulleys and push it on 👍👍

Niedermeier · Jan 25th, 2019, 14:35

Thank you for your answer. Ill just fight with that belt more than hour and the belt does not go into pulley. it floats over pulley. Do you have pictures about that operation?

Niedermeier · Jan 26th, 2019, 08:58

I changed belt manifacturer to gates and that belt goes in with good luck. Thank you

Jan 23rd, 2019, 18:19	#1
Niedermeier New Member Last Online: Jan 26th, 2019 09:39 Join Date: Jan 2019 Location: Klaukkala	Changing air conditioning compressor belt for S80 2008 Hello, How i can change air conditioning compressor serpentine belt for volvo s80 2.4 diesel without special tool? I have dayco belt 5PK628EE, but when i try change belt that is incredibly tight.

Jan 23rd, 2019, 19:49	#2
Ovlovppz Member Last Online: Dec 28th, 2023 18:54 Join Date: Sep 2018 Location: Lincoln	They are incredibly tight. Put the belt over the top pulley Start it on the bottom pulley as tight as you can Put some smooth card or a credit card between the pulley and the belt to help it sliden on. Turn the pulleys and push it on 👍👍 __________________ 2009 Volvo V70 se sport r-design D5 240bhp 440nm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Jan 25th, 2019, 14:35	#3
Niedermeier New Member Last Online: Jan 26th, 2019 09:39 Join Date: Jan 2019 Location: Klaukkala	Thank you for your answer. Ill just fight with that belt more than hour and the belt does not go into pulley. it floats over pulley. Do you have pictures about that operation?

Jan 26th, 2019, 08:58	#4
Niedermeier New Member Last Online: Jan 26th, 2019 09:39 Join Date: Jan 2019 Location: Klaukkala	I changed belt manifacturer to gates and that belt goes in with good luck. Thank you

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)