13C Braided oil and coolant lines

[lee4391]

For Sale
Mambatek Oil and coolant feed lines to suit a 13C, the exact same kit came with my mamabetek 20T turbo so i assume it will fit the normal mistubishi turbos in the volvo range(13C,15G,16/18/19/20T). This will be down to the buyer to confirm.

It is the same kit as in the link;
http://www.ebay.co.uk/itm/MAMBA-Turb...3D192114240606



I bought the kit separately and then bought a brand new 20T which came with another line kit so have one spare.

It comes with all the braided lines, banjo bolts and copper washers, i've fitted one to my 13C a few weeks back and it works well, no leaks and quality looks good.

I'm asking £50 delivered, No offers. Can also be collected from Reading J12 M4.

Any questions give me a shout.

Thanks Lee.

[lee4391]

Still here.

Also have a mambatek adjustable actuator with a variety of springs if anyone is interested. I will sort a separate thread for that later in the week.

Lee

[Spacebar]

How much for the actuator? And does it have the bracket?

[rogerthechorister]

I don't suppose you know if they'd fit a Garrett setup as per B230ET would you?

[lee4391]

£65 for the actuator and yes it has a bracket and a few springs to change the boost pressure.

Sorry i'm unsure if it will fit a garrett.

[Spacebar]

I'll have the actuator if you can post?

[lee4391]

Sorry only just seen this, i can post the actuator yes!

Chuck em a PM or an email at leecarlisle@live.co.uk

Lee

[lee4391]

These are still here, see attached a photo of the actual lines.

Lee

[AceHigh86]

Hi, do you still have this kit? Open to offers yet, quite interested, but still need to source a oil return replacement. Lee

[lee4391]

I do indeed, no offers the price is firm I'm afraid.

With regards to oil return I used a yoshi fab kit, and made up a -10 braided Teflon line. Works well and is a much better solution than to oem hard pipe.