|
AWD Discussion A forum dedicated to the AWD systems fitted to Volvo cars. |
Information |
|
DEM 0006 error on VIDA. Xc70 2006 D5Views : 1479 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 20th, 2018, 23:28 | #1 |
Master Member
Last Online: Feb 28th, 2024 22:04
Join Date: Feb 2013
Location: South wales
|
DEM 0006 error on VIDA. Xc70 2006 D5
Got a xc70 2006 with 200k.
Checked the prop wasn't spinning before I bought it. Scanned with VIDA and it comes up with the following error code. DEM 0006 Pump code faulty. Question is what's caused it? Could it be just oil contamination, blocked filter or a dead pump..... Or something worse such as DEM issues. Looking at the frozen details below it occurred around 190k. Cars now on 201k. I will get under the car once its been collected as I want to service it before using it.
__________________
Who said Volvos were build to last? 2.4t V70XC Auto 2001 165k D5 185 XC70 M66 2006 202k |
Dec 22nd, 2018, 23:57 | #2 |
Member
Last Online: Feb 11th, 2021 08:11
Join Date: Nov 2015
Location: Mallow
|
With mine it was the brushes in the pump motor that went.
I had to replace the pressure sensor too. Mines an '06 with about 275,000kms on it when the pump went. I replaced the filter and oil while it was open too. |
The Following User Says Thank You to The Landshark For This Useful Post: |
Dec 24th, 2018, 06:55 | #3 |
Master Member
Last Online: Feb 28th, 2024 22:04
Join Date: Feb 2013
Location: South wales
|
Hi how did you know the pressure sensor needed changing?
Where did you get the pump bushes? Any guide on how to change them?
__________________
Who said Volvos were build to last? 2.4t V70XC Auto 2001 165k D5 185 XC70 M66 2006 202k Last edited by jgjones095; Dec 24th, 2018 at 07:29. |
Dec 24th, 2018, 09:54 | #4 |
Experienced Member
Last Online: Today 00:05
Join Date: Jun 2007
Location: L/H side
|
test the pump , unplug it from the DEM and apply 12 volts if it sounds to rotate it is probably the DEM at fault ...
__________________
My comments are only based on my opinions and vast experience . |
The Following User Says Thank You to Clan For This Useful Post: |
Dec 26th, 2018, 22:36 | #5 | |
Member
Last Online: Feb 11th, 2021 08:11
Join Date: Nov 2015
Location: Mallow
|
Quote:
I eventually replaced with a new pump, new oil and filter and a new pressure sensor. It has been running fine for 4 years now. The pump should be running all the time. check for 12v on the pump. there are fuses in the REM that feed power to the pump. |
|
The Following User Says Thank You to The Landshark For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|