Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > PV, 120 (Amazon), 1800 General
Register Members CarsBlogs Help Calendar Mark Forums Read

Notices

PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Post-Rebuild B20 - Coolant Leak

Views : 1135

Replies : 44

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Jul 13th, 2019, 13:38   #41
Derek UK
VOC Member
 
Derek UK's Avatar
 

Last Online: Yesterday 23:16
Join Date: Jul 2006
Location: Chatham
Default

Citric acid powder 1lb to 1-gallon imp for a very strong mix. Cheap.
Derek UK is offline   Reply With Quote
Old Jul 13th, 2019, 16:55   #42
gothamus
Junior Member
 

Last Online: Jul 14th, 2019 18:07
Join Date: Aug 2016
Location: New York City
Default Size

Good tip about the descaler. I will use that and flush as adviced. I am sure I can find some trash in the leavings.

I have the original thermostat box. It lists the b18, b20 and b30 for engine type and the temp is 87C / 189F. Last night I drove on the highway in cooler dry weather. The temp is much improved and the worst may be a result of the heatwave.

As for oil pressure- I removed the valve on the flame trap and the pressure at idle dropped by half. To read 2.5 kg. Under highway speeds it was stable around 5, increasing a bit under acceleration or engine breaking. Idle is not unstable.
Ill go without the valve then.

The symptoms I am watching now are how fouled the spark plugs become, as they have been getting dark so far but hard for me to tell if its oily deposits or from richness of fuel mix and heat. I will see how this is this afternoon. In past I pulled them for misfiring at start. I havent had that misfiring for a few days though.

Im still hunting the final electrical short in system that causes tach to die when headlites come on. I finally removed or replaced wiring from engine to dash during build. I have a final string of mess under dash from previous owner I am diagramming before pulling. Difficult access and bad on my back.
gothamus is offline   Reply With Quote
Old Jul 14th, 2019, 19:52   #43
Bob Meadows
Member
 

Last Online: Yesterday 21:20
Join Date: Sep 2017
Location: STANDISH LANCASHIRE
Default

Descaler is available from a number of places: ~ DIY sheds- ebay or your local plumbers merchants, various brands exist but generally all the same base.

The product is mixed with water (try the initial mix hot) goes a long way as it is generally added to the central heating system.
Once completed flush through a couple of times & then back to the antifreeze mix as normal.
Bob.

Last edited by Bob Meadows; Jul 14th, 2019 at 19:55.
Bob Meadows is offline   Reply With Quote
Old Jul 14th, 2019, 20:16   #44
Derek UK
VOC Member
 
Derek UK's Avatar
 

Last Online: Yesterday 23:16
Join Date: Jul 2006
Location: Chatham
Smile

The PCV valve has nothing to do with the oil pressure, it just controls the airflow inside the engine. If the ventilation system is set up correctly there should be just a fraction of vacuum inside the engine. That keeps the oil and fumes inside and directs them to the intake where they combine with the intake air. The late B18 and B20 systems work the opposite way to each other. If you try and mix and match the two systems you can end up pressurising the crankcase and this causes oil leaks. The emissions part of testing in NY may or may not be kind to you if the tester is having a bad day and requires that your engine has the system set up by the book. On the B20 system, there should be a hose from the air filter or filter air box that goes to the oil cap. Air is drawn into the engine from the filter. If you take the oil cap off and put your hand over the hole when the engine is running it should suck on your hand. If it blows the system is set-up wrong. Yes, it is a minefield if you stray from Volvo's system. It's done to minimise emissions and that's that. If you remove the PCV and you have servo attached from the cross pipe you will have problems.
Derek UK is offline   Reply With Quote
Old Yesterday, 07:40   #45
c1800
Senior Member
 

Last Online: Yesterday 18:37
Join Date: Oct 2013
Location: Calgary
Default

Derek
On the B20 system, there should be a hose from the air filter or filter air box that goes to the oil cap.

I think this is incorrect. On the B20 The hose from the air filter goes to the oil trap on the side of the engine and the hose on the oil cap goes to the intake manifold.
c1800 is offline   Reply With Quote
Reply

Tags
b20, engine rebuild, leaking coolant


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:05.


Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.