|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Cowling removalViews : 485 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 11th, 2022, 12:37 | #1 |
Club Director
Last Online: Yesterday 17:25
Join Date: Nov 1999
Location: From Neath, now London
|
Cowling removal
I need to remove the cowling around the steering wheel on my 1995 850 T5 to replace one of the stalks. I looked at a video on YouTube, but mine does not seem to be the same.
The pics below show the underside of the lower panel. There is a small single something in the middle and I have no idea what that is. Then there are the 4 holes. Two holes show the T20 screws, then there are the two holes right at the end. You need a long screwdriver to get in there, but there appears to be no screws. I put my Depstech in the hole to see what was there and that is the other pic. I have no idea about this. The cowling was taken off some years ago by the dealer to replace the ignition barrel.
__________________
Robert Isaac VOC Director 1995 850 T5 auto estate. 280hp 289K miles and purrrs 2009 Jap import V70 2.5T 200hp 51K miles |
Jun 11th, 2022, 18:21 | #2 |
Master Member
Last Online: Today 17:46
Join Date: Jun 2018
Location: Presteigne, mid Wales
|
Seems you are not alone...this may help,
https://www.matthewsvolvosite.com/fo...ic.php?t=16901 http://www.volvotips.com/index.php/8...ervice-manual/
__________________
1998 V70 2.5 Auto & Supercharged Mercedes C Class... |
Jun 11th, 2022, 18:33 | #3 |
Club Director
Last Online: Yesterday 17:25
Join Date: Nov 1999
Location: From Neath, now London
|
Thanks. The T15 does not work, from the pic it looks like something a lot smaller. I'll get a T10 and see if that works. I have a T10 bit but not a long driver.
Bob
__________________
Robert Isaac VOC Director 1995 850 T5 auto estate. 280hp 289K miles and purrrs 2009 Jap import V70 2.5T 200hp 51K miles |
Jun 19th, 2022, 14:42 | #4 |
Club Director
Last Online: Yesterday 17:25
Join Date: Nov 1999
Location: From Neath, now London
|
I have got these off. The problem was because when the dealer fitted a new ignition barrel, when they replaced the top and bottom covers they over tightened the screws and knackered the posts. Bits of plastic fell out when I got them off. Need to find replacements now.
__________________
Robert Isaac VOC Director 1995 850 T5 auto estate. 280hp 289K miles and purrrs 2009 Jap import V70 2.5T 200hp 51K miles |
The Following User Says Thank You to Bob For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|