Heater Control Valve- HELP!

Ian21401 · Mar 23rd, 2019, 15:27

I replaced the valve on my 1992, 940, RHD, no AC back in 2008 and was fortunate to obtain an OE part 9447892. I posted a detailed right up in a previous thread but I’ve been trying for the last hour to find it. I stumbled across it then lost it again.
IIRC the valve itself only has one operating lever. The valve is located in a “housing”. The second cable should be the air distribution cable. It connects to a lever on the “housing” which operates a cam which operates the air distribution flaps. You may have to find a way of mounting the original housing back into the bulkhead for air distribution control and the non standard valve by some other means. Sorry cannot help any more.
Am I correct in assuming that it is the valve itself which is NLA and you still have the original valve housing which locates into the bulkhead?
I found my post but don’t know how to move it into this thread so I’ve had to bump the entire thread, sorry.

Mar 23rd, 2019, 15:27	#11
Ian21401 Premier Member Last Online: Feb 11th, 2023 20:32 Join Date: May 2010 Location: Blyth, Northumberland	I replaced the valve on my 1992, 940, RHD, no AC back in 2008 and was fortunate to obtain an OE part 9447892. I posted a detailed right up in a previous thread but I’ve been trying for the last hour to find it. I stumbled across it then lost it again. IIRC the valve itself only has one operating lever. The valve is located in a “housing”. The second cable should be the air distribution cable. It connects to a lever on the “housing” which operates a cam which operates the air distribution flaps. You may have to find a way of mounting the original housing back into the bulkhead for air distribution control and the non standard valve by some other means. Sorry cannot help any more. Am I correct in assuming that it is the valve itself which is NLA and you still have the original valve housing which locates into the bulkhead? I found my post but don’t know how to move it into this thread so I’ve had to bump the entire thread, sorry. Last edited by Ian21401; Mar 23rd, 2019 at 15:53. Reason: Add text

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)