Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > S80 '06-'16 / V70 & XC70 '07-'16 General

Notices

S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

D5 Swirl Flap Assembly replacement guide

Views : 4231

Replies : 18

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Dec 7th, 2017, 01:12   #1
Semnoz
Senior Member
 

Last Online: Nov 12th, 2023 20:03
Join Date: Jan 2011
Location: NW
Default D5 Swirl Flap Assembly replacement guide

Some photos and useful info I noted down while replacing the swirl flap assembly on my 2008 D5244T4 engine.

Inlet manifold is one large plastic moulding. It looks like the front/top section can be removed via 4 bolts, but it's not removable and those 4 bolts are part of the overall attachment to the cylinder head.

All 5 injectors and high-pressure fuel pipes must be removed before the inlect manifold can be removed. Injector 4 was really stuck despite not looking too bad:


I left the well soaking in Wynns inlet/carb cleaner for 2 days with lots of heaving 'tapping' left and right with mallet and socket extension bar. Eventually got a few degrees rotation. Ran engine with bolts loose but never enough to 'pop' injector out.
I accidentally broke the solenoid nut trying to rotate the injector, so I ended up having to buy a new injector (Darwen Diesel were brilliant, highly recommened). This at least meant I could then dismantle the injector further and fit a proper extractor:


The key tool here was a hollow 10mm allen key to remove the inner nut, and make the internal 17mm threads accessible to the extractor tool:


Before the inlet manifold could be lifted up, it was necessary to create space by moving the hose bracket behind fuel pump so that the corner inlet manifold bolt could be accessed. The oil filler spout also needed to be removed. It was also necessary to loosen the 17mm banjo bolt on fuel pump to move hose out the way.

The inlet manifold was quite hard to lift up simply due to the rubber seal being stuck in place (it's a great design though). It's also necessary to first pull the large rubber connector hose off the main air intake at the front.

Once off, remove the rubber seal and start cleaning !


The control arm on mine had become very worn and wobbling/sliding around on the main shaft. I actually think the cause of oil leak is between the outside of the control arm and the plastic shaft mounting. Compared to the new assembly, this part was very worn. It's not a great design, especially compared to how good the seal is underneath this mount (see photos), but in theory there shouldn't be any oil getting into this region of the engine. THe amount of play between the control arm and main shaft meant when moving back and forth, the swirl flaps were only opening about 2/3rds of the way. So, along with the fact all the flaps were caked in sooty oil, I'm quite glad I decided to replace this part.

Next job is to lever the old swirl assembly up out of the cylinder head.

Caution:
The white plastic end bushing on the old swirl assembly was so worn it fell off as I was lifting it all out - I just managed to catch it before it fell into the air inlet port
Don't forget the cylinder head is aluminium and will scratch easily if you're cleaning off grime with a flat screwdriver - best to use something plastic if possible

Clean as much of the black grime off the cylinder head as possible. Install the new swirl assembly and line up the plastic link arm to the motor ball joint and rotate the swirl back and forth and observe the stop points. This might be useful to have seen if you have any problems with the link arm and motor.



At this point, you could choose to drill through the swirl arm ball in case you want to fit a bolt in future (I chose not to do this in case I had to return the swirl assembly).

Connect the link arm.


Things you should/could do at the same time:
Inspect the cam surfaces for wear. Inspect the valve and springs for any signs of damage or discolouring
Inspect the wiring loom running next to injectors as the outer housing wears out quickly against inlet manifold:


Clean the EGR valve assembly and pipework. This can be a horribly grimy job. I removed the air filter box, main air intake pipe to the RHS of the EGR valve and fitted a clear plastic bag over the end of the housing. I then spent an hour spraying carb cleaner through the from RHS of the valve housing, lots of scraping and pushing through balls of kitchen towel with long screwdriver. I got it as clean as I was willing to, and until I eliminate the source of oil (turbo seals ?) there's no point making it spotless.


Clean the inlet manifold: I used loads of Wynns Inlet/Carb cleaner and scraped out dirt. Then jet-washed inside large plastic bag.


After drying, fit new rubber seal to inside of inlet manifold


It's worth preparing the injector seats at this point. I made a 'cleaning stick' by cutting a foot long 18mm dia dowel and turning the end down to about 17mm dia.


I made a thin pipe attachment to my vacuum cleaning and gave the injector seats a good clean until near spotless:


If cleaning pipe to EGR valve housing, need to decide whether to refit this pipe before putting the inlet manifold in place, or afterwards. It's harder to refit afterwards but the advantage is you're able to gently fit inlet manifold in place without needing to push fit the large pipes together.

Refit the inlect manifold and tighten bolts to 10Nm, starting near the middle and working outwards.

High pressure fuel lines - need 15mm crow's foot and torque wrench accurate for 28Nm.
Injectors, need 8mm socket and torque wrench accurate for 13Nm.

Once everything was back in place, I first cranked engine for 10 seconds and then inspected fuel pipes for leaks (all good). I then cranked engine for another 10 seconds and it started very nicely. Tiny bit of smoke out exhaust which is understandable given all the carb cleaner used everywhere. Took car for a spin, difficult to comment on improvement yet - it certainly felt very nice, and I'd like to think it's breathing easier and revving better, but that could be placebo. I'm hoping fuel economy will have improved, particularly in traffic where I'm now hoping the swirl flaps improve efficiency. I've not actually checked to see if the swirl arm motor is moving yet. I might just try with VIDA to make sure the motor is actually working.

As an additional extra, a couple of useful videos from other people who have done this same job:

Demonstrating a worn swirl assembly and oil leak: https://www.youtube.com/watch?v=DNHt9mcO2rI
My Korean pals showing how it's done: https://www.youtube.com/watch?v=Iug5-8WHb2s
__________________
V70 D5 185 SE Lux P3 (with rear integrated booster seats, which the kids love !!)
Semnoz is offline   Reply With Quote
The Following 9 Users Say Thank You to Semnoz For This Useful Post:
Old Dec 7th, 2017, 07:34   #2
tt82
Forum Support Team
 
tt82's Avatar
 

Last Online: Nov 28th, 2022 18:33
Join Date: Jan 2009
Location: Here.... obviously!
Default

Copied to Articles section.
__________________
The more people I meet, the more I like my dog!


tt82 is offline   Reply With Quote
The Following 2 Users Say Thank You to tt82 For This Useful Post:
Old Dec 7th, 2017, 08:11   #3
S60D5-185
Me ? Surely Not!
 
S60D5-185's Avatar
 

Last Online: Yesterday 10:04
Join Date: Jul 2010
Location: 2007 Volvo XC90 D5 Geartronic. South of Hadrians Wall.
Default

Great write up. Many thanks.
__________________
“Do the right thing. It will gratify some people and astonish the rest.” – Mark Twain 😊


2007 Volvo XC90 D5 SE Geartronic
S60D5-185 is offline   Reply With Quote
Old Dec 7th, 2017, 10:43   #4
Semnoz
Senior Member
 

Last Online: Nov 12th, 2023 20:03
Join Date: Jan 2011
Location: NW
Default

Certainly felt livelier driving to work this morning. Despite a cold damp start to the morning, it drove off as if it was warm, no hesitation at all at low revs.
It feels better when slowly accelerating in 2nd gear at engine speeds less that 1000rpm, e.g. when in very slow moving traffic. I'm hoping this is because I now have swirl flaps that can close properly. I'm sure the amount of black gunk I cleared out the EGR and inlet manifold will have helped too.
__________________
V70 D5 185 SE Lux P3 (with rear integrated booster seats, which the kids love !!)
Semnoz is offline   Reply With Quote
Old Dec 8th, 2017, 00:08   #5
Semnoz
Senior Member
 

Last Online: Nov 12th, 2023 20:03
Join Date: Jan 2011
Location: NW
Default

Some more 'real world' driving to report on, to provide further 'before and after' comparison. It was mainly just driving home in slow traffic, but I did also get onto a motorway for a few minutes.

Overall, the car feels like a lighter car when accelerating at lower speeds up to about 30mph, and the engine response is less 'lumpy'. I'm very concious of speeding and straight away I'm finding myself at about 32/33mph whereas I'd usually be plodding along in built-up areas at about 29/30mph. This is just based on feel, so not a scientific comparison, but I've got very used to required 'pressing' on the accelerator pedal - and overall I don't need to press it as far now.

I did get to do one 'quick blast' at higher speed. On an uphill sliproad onto the motoroway, it travelled through the gears with extra ease, and was soon over 80mph before the road even levelled off while joining the motorway. It certainly felt smoother and more efficient.

On a negative side, if it's dark with cars behind and I floor it, it creates a smoky cloud behind me. In day time I don't see anything, so if it is smoke, it's definately not 'black smoke'. In fact, it could just be soot or some other emissions that are only visible if there are car headlights behind. Oh well, I rarely drive like that, so will worry about it another day. Presently, the car doesn't lose any oil or coolant so I don't think I've got a serious leak anywhere. Maybe a clogged up DPF or something.....but car passed MOT last month easily without even advisories.
__________________
V70 D5 185 SE Lux P3 (with rear integrated booster seats, which the kids love !!)
Semnoz is offline   Reply With Quote
The Following User Says Thank You to Semnoz For This Useful Post:
Old Dec 8th, 2017, 08:26   #6
tt82
Forum Support Team
 
tt82's Avatar
 

Last Online: Nov 28th, 2022 18:33
Join Date: Jan 2009
Location: Here.... obviously!
Default

Do you have a list of parts you bought, including part numbers and prices? I'm told that the injectors require new seals after being removed and that from Volvo they are £40 each. Apparently you can get cheaper items off ebay if your brave enough to trust their the same quality.
__________________
The more people I meet, the more I like my dog!


tt82 is offline   Reply With Quote
Old Dec 8th, 2017, 13:33   #7
Joe Harding
Premier Member
 

Last Online: Today 07:50
Join Date: Oct 2010
Location: Bristol
Default

Excellent write up. Thank you
__________________
"The more people I meet the more I like my God."
Joe Harding is online now   Reply With Quote
Old Dec 8th, 2017, 23:04   #8
Semnoz
Senior Member
 

Last Online: Nov 12th, 2023 20:03
Join Date: Jan 2011
Location: NW
Default

Good source of part numbers here:

http://www.skandix.de/en/spare-parts...valve/1029780/
__________________
V70 D5 185 SE Lux P3 (with rear integrated booster seats, which the kids love !!)

Last edited by Semnoz; Dec 8th, 2017 at 23:06. Reason: duplicate post
Semnoz is offline   Reply With Quote
Old Dec 8th, 2017, 23:06   #9
Semnoz
Senior Member
 

Last Online: Nov 12th, 2023 20:03
Join Date: Jan 2011
Location: NW
Default

Quote:
Originally Posted by tt82 View Post
Do you have a list of parts you bought, including part numbers and prices? I'm told that the injectors require new seals after being removed and that from Volvo they are £40 each. Apparently you can get cheaper items off ebay if your brave enough to trust their the same quality.
I only purchased this item:

https://www.ebay.co.uk/itm/Genuine-V...5/201795359414

This kit came with 5 genuine Volvo copper washers but no part number, so not sure what they are on their own.

If I'd been able to afford it, I would have got the full kit here:

https://www.ebay.co.uk/itm/GENUINE-V...0/222006905768

The individual part number for the swirl flap assembly, link arm and gasket can be found in the above auction description.

So far, I seem to have been OK re-using most parts.
__________________
V70 D5 185 SE Lux P3 (with rear integrated booster seats, which the kids love !!)
Semnoz is offline   Reply With Quote
The Following 2 Users Say Thank You to Semnoz For This Useful Post:
Old Jan 2nd, 2018, 22:13   #10
anyiddo
New Member
 

Last Online: Oct 2nd, 2018 20:49
Join Date: Jan 2016
Location: Whitehaven
Default Problems with Swirl flap motor

Great article - did my swirl arm and manifold clean over Christmas break. Had the same problem with excess movement on the arm in all directions so bit the bullet and changed it. Had a few problems with ejectors sealing but ok.
However the motor is in the wrong position and appears to have overdriven by about 5mm so I can't quite reconnect the link arm. It doesn't seem to want to reset or recalibrate either. I've given it a tug(very stiff) and tried a few options in VIDA but no effect.
Any suggestions anyone?

For now left flaps open and the task has made a hugh difference but would like to sort motor.
anyiddo is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:49.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.