|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
manual grear leaver bushViews : 576 Replies : 8Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 2nd, 2018, 18:48 | #1 |
New Member
Last Online: Jan 28th, 2019 22:58
Join Date: Jul 2018
Location: telford
|
manual grear leaver bush
gear leaver bushings for a manual
having the usual problems with getting first and second... where can i buy the bushes from and ant part numbers 1992 2.3 manual 5 speed |
Oct 2nd, 2018, 18:49 | #2 |
Trader Volvo in my veins
Last Online: Yesterday 23:41
Join Date: Dec 2004
Location: Anglesey
|
still available from volvo dealer
|
Oct 3rd, 2018, 10:40 | #3 |
Master Member
Last Online: Mar 7th, 2024 10:01
Join Date: Oct 2011
Location: East Sussex
|
if you're having problems specifically with 1st and 2nd, check your reverse lockout is correctly adjusted.
|
Oct 4th, 2018, 10:25 | #4 | |
Not an expert but ...
Last Online: Today 10:11
Join Date: Dec 2001
Location: Boncath
|
Quote:
That was my first thought, followed by clutch not releasing fully. I've never had any play in gear levers to cause engagement problems, even with over 400,000 miles. |
|
Oct 4th, 2018, 21:40 | #5 |
Member
Last Online: Mar 11th, 2024 15:13
Join Date: Feb 2016
Location: Glasgow
|
Clutch to replace?
|
Oct 9th, 2018, 08:26 | #6 |
MY 240 DRIVES ME!
Last Online: Mar 19th, 2024 06:59
Join Date: Jan 2007
Location: ashford kent
|
Morning all, is the reverse lockout the nylon sort of L shaped bush that rest against the plate?..The only other one i could see was the ball bush that sits in the selector housing..Slugg. does your lever have a lot of play..ie..wobbles around..Mine has done this for ages and i have learned to live with it but does on occasion make shifting difficult..would like to get it sorted if not too much of a hassle..Still recovering from the cps change..hj.
|
The Following User Says Thank You to honestjoe For This Useful Post: |
Oct 9th, 2018, 14:39 | #7 |
Premier Member
Last Online: Today 20:01
Join Date: Sep 2017
Location: STANDISH LANCASHIRE
|
As circled- adjuster bracket as finger.
The clearance details are listed in the manual 0.02-0.06 Hope it helps Bob. Last edited by Bob Meadows; Oct 9th, 2018 at 14:44. |
Oct 11th, 2018, 19:05 | #8 |
MY 240 DRIVES ME!
Last Online: Mar 19th, 2024 06:59
Join Date: Jan 2007
Location: ashford kent
|
Thanks bob..top man!
|
Oct 12th, 2018, 19:26 | #9 |
New Member
Last Online: Jan 28th, 2019 22:58
Join Date: Jul 2018
Location: telford
|
if i pop up the reverse engage 'pull' its fine, so i think i will do the adjust thing pictured above.
yep lots of play but clutch feels good. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|