|
S60 & V60 '18> / XC60 '17> / S90 & V90 '16> / XC90 '15> General Forum for the SPA-platform 60- and 90-series models |
Information |
|
Jack points for changing wheels?Views : 5913 Replies : 26Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 10th, 2020, 18:02 | #21 | |
Premier Member
Last Online: Today 18:36
Join Date: Dec 2002
Location: Sheffield
|
Quote:
If you want to swap tyres from sides, then this is a real challenge, but doable with maybe three trolley jacks and a very very flat drive. If you want to just swap front to back and leave the tyres on the same side, then yes you can do this with 2 trolley jacks and this will be far the best solution for you. The problem with axle stands is that the car shifts around when it is jacked, as the jack lifts the car at an angle. So the danger is that it dislodges the axle stand when you jack the next corner up. Trolley jacks have wheels, so will move around a little bit when you jack and so have less propensity to tip over. I tried once to do some swapping without bothering with the spare. I had one end up on the standard jack and then was going gingerly at another corner with the trolley jack. I also have a sloping drive. I could see the whole lot was teetering and creaking as I started with the trolley jack, so I quickly dropped it to the deck and did it the long way. If I had carried on, I have no doubt it would have tipped the other jack over and the whole lot would have fallen forwards down the drive onto its belly and brake disk.... But back to your problem, yes 2 trolley jacks, one side at a time, chock the other side securely and you should be good. To be super safe and secure, then pump the 2 jacks together and lift the whole side in one smooth and level movement. In fact, if you just jacked off the back point, you might see that the front wheel almost comes off the ground as well anyway. On the V60, which is lower, the jack actually lifts the front wheel as well from the back jacking point, so I could do the winter wheel swap with only jacking it twice, but it gets the car a bit high, so I tend to do it the long way and move the jack 4 times. Hopefully this makes sense. 2 trolley jacks, some common sense and chocking the remaining wheels and you shouldn't go too far wrong.
__________________
Currently:- MY16 XC90 T8 Momentum, Magic Blue 174k miles. MY17 V60 T4 Power Blue. Previously:- 1997 V70 T5 exPolice; 2005 V50 2.0D; 2013 XC70 D5 Last edited by Philip Fisher; Jul 10th, 2020 at 18:05. |
|
The Following User Says Thank You to Philip Fisher For This Useful Post: |
Jul 10th, 2020, 19:22 | #22 |
Junior Member
Last Online: Apr 29th, 2023 11:21
Join Date: Mar 2019
Location: Newport
|
Thanks for your reply.
I shall proceed in this manner using two 5 tonne bottle jacks with 400mm lift. Watch this space...
__________________
Volvo XC60 D4 R-Design MY19 onyx black |
Jul 10th, 2020, 21:11 | #23 |
Premier Member
Last Online: Today 18:36
Join Date: Dec 2002
Location: Sheffield
|
Glad to help. Let us know how you get on.
__________________
Currently:- MY16 XC90 T8 Momentum, Magic Blue 174k miles. MY17 V60 T4 Power Blue. Previously:- 1997 V70 T5 exPolice; 2005 V50 2.0D; 2013 XC70 D5 |
The Following User Says Thank You to Philip Fisher For This Useful Post: |
Jul 20th, 2020, 14:45 | #24 |
Junior Member
Last Online: Apr 29th, 2023 11:21
Join Date: Mar 2019
Location: Newport
|
__________________
Volvo XC60 D4 R-Design MY19 onyx black |
The Following 2 Users Say Thank You to Pipps For This Useful Post: |
Aug 4th, 2020, 16:21 | #25 |
Junior Member
Last Online: Apr 29th, 2023 11:21
Join Date: Mar 2019
Location: Newport
|
Today I successfully used the principles outlined in the above video and it worked out perfectly.
I bought a pair of plain 20 mm thick rubber "hockey puck" jack spacers on eBay here for £3.50 each. I also purchased a pair of flat-topped 2-tonne scissor jacks which lift to 400 mm on eBay here for £10 each. I needed to buy a new jack as Kwik Fit stole my original Volvo jack while repairing a NSF nail puncture last year. To join the wooden pieces, I already had some 5x60 mm wood screws leftover from an earlier fencing project. I also bought eight 50 mm thick basic paving bricks at 35p each. As the ground was bumpy, I also two paving slabs. I bought a single 2.4m-long plank of "two-by-four", or 40 cm by 89 cm timber, from a local DIY superstore for £4.50. I first cut two 27 cm sections from the timber, and then a further twenty 9 cm (89 mm) sections as well. I screwed six 9 cm pieces as legs onto each of the 27 cm pieces, and then screwed each puck on top. Total cost of £7.15 each (excluding jacks - you could borrow a neighbour's). Very enjoyable to make. I am not recommending that anyone else do this, but just want to show how easy it can be done. A very cheap and easy way to rotate car tyres for getting the maximum mileage.
__________________
Volvo XC60 D4 R-Design MY19 onyx black |
The Following 2 Users Say Thank You to Pipps For This Useful Post: |
Aug 4th, 2020, 17:47 | #26 |
Premier Member
Last Online: Today 18:36
Join Date: Dec 2002
Location: Sheffield
|
Looking at your car there, reminds me of my time living in Greater Manchester in the late 90's.......
My neighbour came out one morning to find his Mondeo ST-24 was supported by his rockery rather than by its wheels......
__________________
Currently:- MY16 XC90 T8 Momentum, Magic Blue 174k miles. MY17 V60 T4 Power Blue. Previously:- 1997 V70 T5 exPolice; 2005 V50 2.0D; 2013 XC70 D5 |
Aug 4th, 2020, 18:09 | #27 |
Master Member
Last Online: Today 12:05
Join Date: Oct 2019
Location: Cannock
|
I thought it was posted as a joke, I didn't think anyone would really do it!
__________________
Red XC60 Momentum T5, 2019 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|