|
300/66 Series General Forum for the Volvo 340, 360 and 66 cars |
Information |
|
340 Water TempViews : 787 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 20th, 2004, 20:09 | #1 |
Guest
Location:
|
340 Water Temp
Hello
When the car is running and driving the temp needle stays around the LED. When stationary the needle moves steadily up, the fan kicks in just before the hot section. I have fitted a new thermostat and a new fan sensor switch, could it be a dodgy water pump or even the fan itself although it does work ish. Cheers Mark |
Dec 21st, 2004, 11:34 | #2 |
Guest
Location:
|
RE: 340 Water Temp
erm, whats the problem? this is working as designed..
|
Dec 21st, 2004, 17:46 | #3 |
Guest
Location:
|
RE: 340 Water Temp
yes but shouldn't the needle stay in the middle all the time
cheers mark |
Dec 22nd, 2004, 10:23 | #4 |
Guest
Location:
|
RE: 340 Water Temp
not really - when the car is stationary the engine will warm up until the fan kicks in, when it will cool itself back down again.. the engine is fine at running at temps below the red zone
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|